Laborübung WAN - Cisco Agenda
Laborübung WAN - Cisco Agenda
Laborübung WAN - Cisco Agenda
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ITTK - <strong>WAN</strong> - WS2006<br />
<strong>Cisco</strong> Labor Day 1 (V1.6)<br />
Convergence Test Performed<br />
Triggered by instructor<br />
cable remove between Hub-Z1 and Hub-Z2 -> network failure<br />
cable connected again -> network repair<br />
Simulate network failure<br />
cable remove -> 20.20.78.0 times out for WG1<br />
cable remove -> 10.10.12.0 times out for WG2<br />
Note: you have to wait quit long (minutes) until these networks finally<br />
disappear from all routing tables<br />
Try to explain why?<br />
Repair network failure<br />
cable connected -> 20.20.78.0 comes back for WG1<br />
cable connected -> 10.10.12.0 comes back for WG2<br />
Finally stop capturing of Ethereal and recording of telnet output, save<br />
them to the specified files and sent the files to the TFTP Server<br />
45.0.0.100<br />
© 2006, D.I. Manfred Lindner <strong>Cisco</strong> Lab <strong>WAN</strong> D1, v1.6 61<br />
<strong>Agenda</strong><br />
1) Lab Overview<br />
2) <strong>Cisco</strong> Basics<br />
3) IOS-CLI Introduction<br />
4) Lab Topology <strong>WAN</strong><br />
5) Lab Topology LAN and Basic IP Addressing (Classful)<br />
6) RIPv1 Configuration<br />
7) RIPv2 Configuration (Classless) and NTP<br />
8) RIP Convergence Test<br />
9) Default Routing<br />
10) Advanced IP Addressing (VLSM)<br />
11) Lab Wrap up<br />
12)Topology Slides Day1<br />
© 2006, D.I. Manfred Lindner <strong>Cisco</strong> Lab <strong>WAN</strong> D1, v1.6 62<br />
© 2006, D.I. Manfred Lindner<br />
Page 1 - 31