Laborübung WAN - Cisco Agenda
Laborübung WAN - Cisco Agenda
Laborübung WAN - Cisco Agenda
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ITTK - <strong>WAN</strong> - WS2006<br />
<strong>Cisco</strong> Labor Day 1 (V1.6)<br />
Save Configuration to NVRAM and TFTP (E2)<br />
If network topology of your workgroup is fully verified then<br />
save your configuration to NVRAM<br />
copy running-config startup-config (copy run start)<br />
sh startup-config (sh start)<br />
Ping if you can reach TFTP server at 45.0.0.100 from<br />
every router of your workgroup<br />
If ok save the configuration of your router of your<br />
workgroup to a TFTP server:<br />
Cmd: copy running-config tftp<br />
you are asked to enter ip address of server<br />
you are asked to specify a filename<br />
Filenames to be specified:<br />
e2r1.txt, e2r2.txt, e2r3.txt … e2r8.txt<br />
e2 means example2, r1 means router 1, …..<br />
© 2006, D.I. Manfred Lindner <strong>Cisco</strong> Lab <strong>WAN</strong> D1, v1.6 49<br />
<strong>Agenda</strong><br />
1) Lab Overview<br />
2) <strong>Cisco</strong> Basics<br />
3) IOS-CLI Introduction<br />
4) Lab Topology <strong>WAN</strong><br />
5) Lab Topology LAN and Basic IP Addressing (Classful)<br />
6) RIPv1 Configuration<br />
7) RIPv2 Configuration (Classless) and NTP<br />
8) RIP Convergence Test<br />
9) Default Routing<br />
10) Advanced IP Addressing (VLSM)<br />
11) Lab Wrap up<br />
12)Topology Slides Day1<br />
© 2006, D.I. Manfred Lindner <strong>Cisco</strong> Lab <strong>WAN</strong> D1, v1.6 50<br />
© 2006, D.I. Manfred Lindner<br />
Page 1 - 25
Change language