Enterprise QoS Solution Reference Network Design Guide

Catalyst 4500 Supervisor II+/III/IV/V—QoS Considerations and Design
2-68
CAT4500-SUP4(config-pmap-c)# exit
CAT4500-SUP4(config-pmap)#exit
CAT4500-SUP4(config)#
CAT4500-SUP4(config)#
CAT4500-SUP4(config)#interface FastEthernet2/1
CAT4500-SUP4(config-if)# service-policy input UNTRUSTED-SERVER
CAT4500-SUP4(config-if)#exit
CAT4500-SUP4(config)#
CAT4500-SUP4(config)#
CAT4500-SUP4(config)#ip access list extended SAP
CAT4500-SUP4(config-ext-nacl)# permit tcp any range 3200 3203 any
CAT4500-SUP4(config-ext-nacl)# permit tcp any eq 3600 any
CAT4500-SUP4(config-ext-nacl)#
CAT4500-SUP4(config-ext-nacl)#ip access list extended LOTUS
CAT4500-SUP4(config-ext-nacl)# permit tcp any eq 1352 any
CAT4500-SUP4(config-ext-nacl)#
CAT4500-SUP4(config-ext-nacl)#ip access list extended IMAP
CAT4500-SUP4(config-ext-nacl)# permit tcp any eq 143 any
CAT4500-SUP4(config-ext-nacl)# permit tcp any eq 220 any
CAT4500-SUP4(config-ext-nacl)#end
CAT4500-SUP4#
Catalyst 4500 QoS Verification Commands
Enterprise QoS Solution Reference Network Design Guide
Chapter 2 Campus QoS Design
Catalyst 4500 QoS verification commands for the Catalyst 4500 Untrusted Server with Scavenger-Class
QoS model include the following:
show qos
show qos maps
show qos interface
show class-map
show policy-map
show policy interface
Catalyst 4500 —Conditionally-Trusted IP Phone + PC with Scavenger-Class
QoS (Basic) Model
Configuration
This section includes the following topics:
Configuration
Catalyst 4500 QoS Verification Commands
The Catalyst 4500 does not currently support per-port/per-VLAN policing. Therefore, access lists that
include the VVLAN subnet are required to achieve granular policing of the VVLAN and DVLAN
subnets, as shown below.
Example 2-40 Catalyst 4500—Conditionally-Trusted IP Phone + PC + Scavenger (Basic) Model
Configuration
CAT4500-SUP4(config)#qos map cos 5 to dscp 46
! Modifies CoS-to-DSCP mapping to map CoS 5 to DSCP EF
Version 3.3