19.07.2013 Views

Enterprise QoS Solution Reference Network Design Guide

Enterprise QoS Solution Reference Network Design Guide

Enterprise QoS Solution Reference Network Design Guide

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Chapter 2 Campus <strong>QoS</strong> <strong>Design</strong><br />

Version 3.3<br />

commit qos acl ACL_IP-PHONES<br />

set qos acl map ACL_IP-PHONES mode/port<br />

set port qos mod/port trust trust-cos<br />

If the port type is another port type, the configuration is as follows:<br />

set port qos mod/port trust trust-cos<br />

Catalyst 6500 PFC2/PFC3—<strong>QoS</strong> Considerations and <strong>Design</strong><br />

The effects of enabling the port-specific set port qos mod/port autoqos voip ciscosoftphone command on<br />

the Catalyst 6500 in CatOS are as follows.<br />

Example 2-54 Catalyst 6500 Port-Specific Auto<strong>QoS</strong> VoIP CiscoSoftPhone Generated Configuration<br />

set port qos mod/port autoqos voip ciscosoftphone<br />

--------------set<br />

port qos mod/port policy-source local<br />

set port qos mod/port port-based<br />

set port qos mod/port cos 0<br />

set port qos mod/port cos-ext 0<br />

set port qos mod/port trust-ext untrusted<br />

set port qos mod/port trust-device none<br />

set port qos mod/port trust untrusted<br />

set qos policer aggregate POLICE_SOFTPHONE-DSCP46-mod-port rate 320 burst 20 policed-dscp<br />

set qos policer aggregate POLICE_SOFTPHONE-DSCP26-mod-port rate 32 burst 8 policed-dscp<br />

set qos acl ip ACL_IP-SOFTPHONE-mod-port trust-dscp aggregate<br />

POLICE_SOFTPHONE-DSCP46-mod-port any dscp-field 46<br />

set qos acl ip ACL_IP-SOFTPHONE-mod-port trust-dscp aggregate<br />

POLICE_SOFTPHONE-DSCP26-mod-port any dscp-field 26<br />

commit qos acl ACL_IP-SOFTPHONE-mod-port<br />

set qos acl map ACL_IP-SOFTPHONE-mod-port mod/port<br />

The effects of enabling the port-specific set port qos mod/port autoqos voip trust cos command on the<br />

Catalyst 6500 in CatOS are as follows.<br />

Example 2-55 Catalyst 6500 Port-Specific Auto<strong>QoS</strong> VoIP Trust CoS Generated Configuration<br />

set port qos mod/port autoqos trust cos<br />

--------------set<br />

port qos mod/port policy-source local<br />

set port qos mod/port port-based<br />

set port qos mod/port cos 0<br />

set port qos mod/port cos-ext 0<br />

set port qos mod/port trust-ext untrusted<br />

set port qos mod/port trust-device none<br />

If the port is on a 2Q2T-Tx/1Q4T-Rx (non-GigabitEthernet) linecard, the configuration is as follows:<br />

set qos acl ip ACL_IP-TRUSTCOS trust-cos any<br />

commit qos acl ACL_IP-TRUSTCOS<br />

set qos acl map ACL_IP-TRUSTCOS mode/port<br />

set port qos mod/port trust trust-cos<br />

If the port type is another port type, the configuration is as follows:<br />

set port qos mod/port trust trust-cos<br />

The Auto<strong>QoS</strong> VoIP command with the Trust-DSCP option is virtually identical to the Trust-CoS option<br />

(albeit the final configuration commands are set port qos mod/port trust trust-dscp instead of<br />

trust-cos).<br />

<strong>Enterprise</strong> <strong>QoS</strong> <strong>Solution</strong> <strong>Reference</strong> <strong>Network</strong> <strong>Design</strong> <strong>Guide</strong><br />

2-85

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!