Black Box Reloaded User Guide - M-Audio

More documents

Recommendations

Info

Driver Installation Windows XP (SP2) NOTE: Do NOT connect the Black Box to your computer until you have run the installer application and completed the installation. Insert the Black Box driver CD-ROM into your computer. If your computer’s “Autoplay” function is on, an M-Audio menu screen will come up. If not, you’ll need to browse the contents of the CD and select “Autoplay.” With the M-Audio menu up, use the Product drop-down menu to select Black Box. Then click on “Install.” The installation process will begin. Click “Next>” to continue. After you’ve read the license agreement, please click the “I accept...” circle if you agree to the terms. Then click “Next” to continue. User Guide ♦ 30
The installer will copy the necessary files to your computer’s hard drive when you click on INSTALL. During the installation, you will be prompted with a message warning that the driver software has not passed Windows Logo testing Select “Continue Anyway” and proceed with the installation. Once the installer has finished copying the files, you will see the “Installation Successful” screen. Click FINISH. Plug your USB cable into your Black Box, and then plug the other end of the USB cable into the computer. Windows will identify the Black Box. You may be asked if you want to search the internet for a driver. Select “No, not this time” and press “Next.” Your computer will display a “New Hardware Found” message indicating your Black Box is now installed and ready to use. You will see the M-Audio Black Box Control Panel icon in your system tray (lower right corner of your desktop). Double-click on the icon to open the Black Box control panel. In your Windows XP control panel, double-click on the Sounds and Audio Devices icon, then select the Audio tab. You should see the screen below. If the Black Box does not show up automatically, use the drop down menu to select it. If the device is not available, restart your computer and try again. User Guide ♦ 31 English
Page 1 and 2: Reloaded: with updated firmware and
Page 3 and 4: IMPORTANT! Audio equipment should A
Page 5 and 6: However, we didn’t stop there. We
Page 7 and 8: Tap Tempo Key (31) This key allows
Page 9 and 10: Editing the Guitar Amp and Compress
Page 11 and 12: The following is a description of e
Page 13 and 14: 24. INTENS (same as Black Box versi
Page 15 and 16: Editing the Modulation and Filter E
Page 17 and 18: Tremolo (TREM1 - TREM3) This is a c
Page 19 and 20: Filter Sequences (FLSQ 1 - FLSQ20)
Page 21 and 22: Drums to Delay/Input This is a spec
Page 23 and 24: Noise Gate (Shift: Preset Volume) B
Page 25 and 26: Assigning Momentary Foot Switch Ped
Page 27 and 28: Tuner Function Tuner Function Press
Page 29: Using the Black Box with the Comput
Page 33 and 34: The Read Me box will appear next. T
Page 35 and 36: You will need your Administrator Pa
Page 37 and 38: Control Panels A description of eac
Page 39 and 40: Copy from Device Presets are saved
Page 41 and 42: Troubleshooting The Black Box has b
Page 43 and 44: Specifications General Sample Rate
Page 45 and 46: System Common messages Status Secon
Page 47 and 48: System Exclusive Messages Transmit
Page 49 and 50: Select preset (message ID 9) When B
Page 51 and 52: Transmit Main Parameters (Message I
Page 53 and 54: Data Structures Preset Data Structu
Page 55: 7-Bit Data Packing The general data

Black Box Reloaded User Guide - M-Audio

Create successful ePaper yourself

Delete template?

Save as template?