Using Multiservice Interface Modules - Juniper Networks

More documents

Recommendations

Info

Using Multiservice Interface Modules 26 Copyright © 2012, Juniper Networks, Inc.
CHAPTER 4 Configuring 4WTO Daughter Cards to Interoperate with Multiservice Interface Modules (CTPView) • Configuring 4WTO Daughter Cards to Interoperate with Multiservice Interface Modules (CTPView) on page 27 Configuring 4WTO Daughter Cards to Interoperate with Multiservice Interface Modules (CTPView) Interoperability of Multiservice Interface modules with 4WTO daughter cards requires the following: Copyright © 2012, Juniper Networks, Inc. • Firmware revision 4 or higher on the 4WTO daughter card. • CTPView releases 3.4R4 or 4.x. • CTPOS release 6.0 or higher. • Channel 1 cannot be configured as the channel option. When you enable interoperability of the 4WTO daughter card with Multiservice Interface modules, the port speed for the bundle is set as follows: • 64 when only channel 0 is enabled. • 128 when dual channel is enabled. Before you begin: • Log in to the CTPView software at least at the Net_Admin level. • Connect the CTPView server to the CTP device for which you want to configure bundles. To configure 4WTO daughter cards to interoperate with Multiservice Interface module using CTPView: 1. In the side pane, select Bundle > Configuration. 2. Run your mouse over the Display and Select an Existing Bundle bar. 3. In the table of bundles, select the bundle that you want to modify. 27
Page 1 and 2: Using Multiservice Interface Module
Page 3 and 4: Table of Contents Part 1 Overview A
Page 5 and 6: List of Figures Part 1 Overview Cha
Page 7 and 8: List of Tables Part 2 Configuration
Page 9 and 10: About the Documentation • Documen
Page 11 and 12: Table 2: Text and Syntax Convention
Page 13 and 14: PART 1 Overview Copyright © 2012,
Page 15 and 16: CHAPTER 1 Multiservice Interface Mo
Page 17 and 18: Serial Multiservice Interface Modul
Page 19 and 20: • Embedded frame requiring no add
Page 21 and 22: PART 2 Configuration Copyright © 2
Page 23 and 24: CHAPTER 2 Configuring Multiservice
Page 25 and 26: Table 3: CTP Bundle Multiservice Au
Page 27 and 28: 3. In the table of bundles, select
Page 29 and 30: Table 6: CTP Bundle Multiservice 4W
Page 31 and 32: CHAPTER 3 Configuring Multiservice
Page 33 and 34: Table 7: CTP Bundle Multiservice Au
Page 35 and 36: Configuring Multiservice TDC Mode P
Page 37: Table 10: CTP Bundle Multiservice 4
Page 41 and 42: CHAPTER 5 Configuring 4WTO Daughter
Page 43 and 44: PART 3 Index Copyright © 2012, Jun
Page 45 and 46: Index Symbols #, comments in config

Using Multiservice Interface Modules - Juniper Networks

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?