Using Multiservice Interface Modules - Juniper Networks
Using Multiservice Interface Modules - Juniper Networks
Using Multiservice Interface Modules - Juniper Networks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Using</strong> <strong>Multiservice</strong> <strong>Interface</strong> <strong>Modules</strong><br />
4. Under Port Options, configure the MS Interwork parameter as described in Table 11<br />
on page 28.<br />
5. Click Click to Submit Bundle AND Port Changes.<br />
Table 11: CTP Bundle 4WTO Interoperability Parameter Setting in CTPView<br />
28<br />
Field<br />
MS Interwork<br />
Function<br />
Enables or disables interoperability of<br />
the 4WTO daughter card with<br />
<strong>Multiservice</strong> <strong>Interface</strong> modules.<br />
Your Action<br />
• ENABLED—Interoperability with the<br />
<strong>Multiservice</strong> <strong>Interface</strong> module is<br />
enabled.<br />
• DISABLED—Interoperability with the<br />
<strong>Multiservice</strong> <strong>Interface</strong> module is<br />
disabled.<br />
Copyright © 2012, <strong>Juniper</strong> <strong>Networks</strong>, Inc.