Component Rehabilitation of 10 Bridges, Citywide - NYC.gov

NYC Specifications for Title Examinations and Reports on Privately-Owned Tax Lots
NYCDEP Water Supply and Sewer Standards
Electric Code of the City of New York
National Electric Code
NYSDOT Engineering Bulletins and Engineering Instructions
NYSDOT Highway Design Manual, Volumes 1 and 2
NYSDOT Standard Specifications
NYSDOT Steel Construction Manual
NYSDOT Geometric Design Policy for Bridges
NYSDOT Prestressed Concrete Construction Manual
NYSDOT Manual of Uniform Traffic Control Devices
NYSDOT Uniform Code of Bridge Inspection
NYSDOT Bridge Inspection Manual
NYSDOT Bridge Inventory and Inspection System Manual
NYSDOT Specifications for In-Depth Bridge Inspection
NYSDOT Specification for Diving Inspection of Bridges
NYSDOT Rating Criteria for Diving Inspection of Bridges
NYSDOT Engineering Instructions for Load Ratings
NYSDOT Bridge Deck Evaluation Procedure Manual
NYSDOT Standard Detail for Highway Bridges, Bridge Design Data Sheets and Guideline Drawings
NYSDOT Right of Way Mapping Procedure Manual
NYSDOT Manual of Administrative Procedure (MAP)
NYSDOT Interim Guide to Metric Design
NYSDOT Metric Conversion Guidelines. Structures Division
AASHTO Standard Specifications for Highway Bridges, as amended by NYSDOT
AASHTO Standard Specifications for Movable Highway Bridges
AASHTO Manual for Condition Evaluation of Bridges
AASHTO Guide for the Development of Bicycle Facilities
AASHTO Guide to Metric Conversion
AISC Metric Properties of Structural Shapes
ASTM Standard Specifications
FHWA Bridge Inspector's Manual for Movable Bridges
FHWA Seismic Design and Retrofit Manual for Highway Bridges
FHWA Seismic Retrofitting Guidelines for Highway Bridges
5. The Consultant shall develop an initial Progress Report (Bar Chart Schedules and Written Text),
and update them monthly in accordance with Section V, Progress Reporting of this Contract. The
Progress Report for Final Design shall also include a list of Contract Drawings showing the
estimated percent of completion of each drawing.
6. The Consultant shall interview Departmental Maintenance, Inspection, and Engineering personnel,
as appropriate, to determine the location and extent of all problems and issues in the Project.
7. The Consultant shall interview the appropriate personnel to determine the requirements for gaining
access to the site for the purpose of performing the proposed contractual work.
8. The Consultant shall interview additional interested parties, as deemed appropriate by the
Commissioner, to determine if the project will impact on their activities.
9. As directed by the Commissioner, the Consultant shall arrange all meetings and participate/function
as Chairperson at all meetings and conferences required in the performance of contractual work,
including any/all required follow-up meetings and/or actions.
SR - 3