ETERNUS DX60/DX80/DX90 Disk storage system User Guide - Fujitsu
ETERNUS DX60/DX80/DX90 Disk storage system User Guide - Fujitsu
ETERNUS DX60/DX80/DX90 Disk storage system User Guide - Fujitsu
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 5 Installation<br />
5.2 Rack Installation<br />
Procedure<br />
1 Refer to "<strong>ETERNUS</strong> <strong>DX60</strong>/<strong>DX80</strong>/<strong>DX90</strong> <strong>Disk</strong> <strong>storage</strong> <strong>system</strong> Package Contents"<br />
to confirm there are no missing parts for the rack mount kit.<br />
Refer "<strong>ETERNUS</strong> <strong>DX60</strong>/<strong>DX80</strong>/<strong>DX90</strong> <strong>Disk</strong> <strong>storage</strong> <strong>system</strong> Package Contents"<br />
2 Attach the M5 cage nuts or M5 rack nuts to the rear rack pillar.<br />
• Attachment positions<br />
On either side, insert eight M5 cage nuts or M5 rack nuts in the 1st, 3rd, 4th, and 6th<br />
holes above the AC outlet box base line.<br />
• Attachment procedure<br />
• Use the M5 cage nuts if the rack pillar holes are square.<br />
• Use the M5 rack nuts if the rack pillar holes are round.<br />
M5 cage nut or<br />
M5 rack nut<br />
(Rear rack pillars)<br />
[Left] [Right]<br />
6th position<br />
4th position 2U 1U AC outlet box<br />
3rd position<br />
1st position<br />
1U<br />
AC outlet box<br />
Base line of<br />
AC outlet box<br />
M5 cage nut<br />
Clip the cage nut tabs into the desired<br />
hole from the inside.<br />
Side view<br />
M5 cage nut<br />
Rack pillar (square)<br />
M5 cage nut or<br />
M5 rack nut<br />
6th position<br />
4th position<br />
3rd position<br />
1st position<br />
M5 rack nut<br />
Clip the rack nut over the desired<br />
hole from the side.<br />
M5 Rack nut<br />
Rack pillar (round)<br />
104<br />
<strong>ETERNUS</strong> <strong>DX60</strong>/<strong>DX80</strong>/<strong>DX90</strong> <strong>Disk</strong> <strong>storage</strong> <strong>system</strong> <strong>User</strong> <strong>Guide</strong><br />
Copyright 2011 FUJITSU LIMITED P3AM-3042-08ENZ0
Change language