ETERNUS DX60/DX80/DX90 Disk storage system User Guide - Fujitsu

Chapter 6 Cable Connection
6.5 MiniSAS Cable Connection (For SAS)
■ MiniSAS cable connection procedure
The following explains how to connect the miniSAS cable.
IMPORTANT
Procedure
1 Connect the miniSAS cables to the ETERNUS DX60/DX80.
Insert the miniSAS cable connectors in the controller 0 (CM#0) and controller 1 (CM#1)
SAS ports.
IMPORTANT
• To help with miniSAS cable management and prevent incorrect
connections, attach labels to the miniSAS cables and make a note of
connection origins and destinations.
• When connecting miniSAS cables, check the connector orientation and
then firmly push it all the way in.
When disconnecting miniSAS cables, use the pull-tab to extract the
connector.
miniSAS cable
tab
Do not connect this cable to the SAS (OUT) port.
117
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Copyright 2011 FUJITSU LIMITED P3AM-3042-08ENZ0