Working Model - MAELabs UCSD
Working Model - MAELabs UCSD
Working Model - MAELabs UCSD
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WM52ProductGuide.fm Page 26 Tuesday, March 2, 2004 12:04 PM<br />
26<br />
B. Two Points (Actuator, Damper, Pin, Rod, Rope, Separator, Spring, Spring/<br />
Damper)<br />
C. Three or more points (Pin)<br />
Create and/or select the point(s) where you would like to add a constraint. Run the<br />
script and specify the desired constraint.<br />
6.5 The Document <strong>Model</strong> Script<br />
This script enables you to completely document a model. Running this script produces<br />
a text file that lists information (e.g., units, properties, bodies, constraints, integration<br />
settings, etc.) that describes the model.<br />
6.6 The Zoom to Extent Script<br />
Zoom to Extent adjusts the zoom so you can view your entire model in the simulation<br />
window. Simply select this script from the menu to run it.<br />
6.7 The Measure Between Points Script<br />
Running this script creates a meter that measures the distance between the two selected<br />
points. The distance is displayed once you run (or re-run) your model.<br />
6.8 The Flip Polygon Script<br />
Flip Polygon allows you to flip a polygon into a mirror-image position. Before<br />
running this script, create and select a polygon. Run the script, then specify whether<br />
you want to flip the polygon horizontally or vertically.<br />
6.9 The Pin Friction Script<br />
This script allows you to simulate friction on pin joints. Before running the script,<br />
create and select a pin joint. Run the script to create two input controls: one for the<br />
effective pin radius and the other for the coefficient of friction in the joint. Adjust the<br />
values and run your model to simulate the friction.
Change language