SEL-FR3 Selenio Frame Installation and Operation ... - Biznine.com
SEL-FR3 Selenio Frame Installation and Operation ... - Biznine.com
SEL-FR3 Selenio Frame Installation and Operation ... - Biznine.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Frame</strong> Dimensions<br />
<strong>SEL</strong>-<strong>FR3</strong><br />
<strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> Manual<br />
CAUTION:<br />
Do not use screws longer than those provided for the rear support brackets. Five<br />
4-40 x1/4-inch flat-head screws are provided for this purpose. Longer screws could<br />
cause internal damage.<br />
3 Attach the two slotted rack support brackets at the rear of the rack, with the slots facing<br />
inside.<br />
4 Push the <strong>Selenio</strong> <strong>Frame</strong> frame into the front of the rack, ensuring that the frame support<br />
brackets slide into the slotted rack supports.<br />
Figure 1-5 Sliding Rear Support Bracket<br />
5 Attach the front of the frame to the rack, using the appropriate rack screws.<br />
6 Close the front cover to ensure to ensure proper cooling.<br />
7 Attach all of the necessary cable connections.<br />
Table 1-2 <strong>Frame</strong> Dimensions<br />
Item Specification<br />
Height 3RU<br />
Width 19 in. (48.3 cm)<br />
Depth, including visible 0.7 in (1.8 cm) of<br />
optional SFP module <strong>and</strong> transceiver<br />
20.8 in. (52.8 cm)<br />
Copyright © 2011, Harris Corporation<br />
5
Change language