SEL-FR3 Selenio Frame Installation and Operation ... - Biznine.com
SEL-FR3 Selenio Frame Installation and Operation ... - Biznine.com
SEL-FR3 Selenio Frame Installation and Operation ... - Biznine.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Back Connectors<br />
Ethernet<br />
Ports<br />
<strong>SEL</strong>-<strong>FR3</strong><br />
<strong>Installation</strong> <strong>and</strong> <strong>Operation</strong> Manual<br />
The <strong>Selenio</strong> <strong>Frame</strong> supports redundant primary <strong>and</strong> secondary Ethernet modules, providing<br />
control <strong>and</strong> data ports that are connected to the resource module via the midplane<br />
interface. The <strong>SEL</strong>OPT-RR option provides dual RJ45 connectors; the <strong>SEL</strong>OPT-RO option<br />
provides an RJ45 connector, <strong>and</strong> an SFP optical connector.<br />
Table 1-6 Gigabit Electrical Ethernet Specifications<br />
Item Specification<br />
Connector RJ-45<br />
St<strong>and</strong>ard 10/100/1000BASE-T<br />
(1000BASE-T is not supported on the front Ethernet port)<br />
Differential output voltage 0.75 V +/-0.83 dB<br />
High frequency jitter 0.3 ns<br />
CMRR 1V RMS 1-250 MHz<br />
Clock frequency 125 MHz +/-0.01%<br />
Table 1-7 Gigabit Optical Single-Mode Laser (OP+SFP+<strong>SEL</strong>) Laser Specifications<br />
Item Specification<br />
Type LC<br />
Average output power (min.) -9 dBm<br />
Average output power (max.) -3 dBm<br />
Mean optical wavelength 1270 nm-1355 nm; 10 km range<br />
Input power (min.) -20 dBm<br />
Input power (max.) -3 dBm<br />
Laser mode Single-mode, 1310 nm FP laser<br />
Supply voltage 3.135 to 3.465 V<br />
Ejector Bail actuator operating case<br />
Temperature -40º to +85ºC<br />
Copyright © 2011, Harris Corporation<br />
11
Change language