PROFIBUS-DP User Manual for Encoder - heidenhain - DR ...
PROFIBUS-DP User Manual for Encoder - heidenhain - DR ...
PROFIBUS-DP User Manual for Encoder - heidenhain - DR ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Configuration example<br />
4 Configuration example<br />
28<br />
This chapter will illustrate how to set up and configure an encoder<br />
gateway with <strong>PROFIBUS</strong> <strong>DP</strong>V2 in isochronous operation. In the<br />
example below a Siemens Step 7 PLC and SIMATIC MANAGER<br />
was used.<br />
4.1 Device description file installation (GSD-file)<br />
In order to start using an encoder gateway with <strong>PROFIBUS</strong><br />
interface, a device description file needs to be downloaded and<br />
imported to the configuration software.<br />
The latest available GSD file can be downloaded from<br />
www.<strong>heidenhain</strong>.com.<br />
Installation of GSD-files in SIMATIC MANAGER<br />
1. Select Options -> Install GSD File and click the Browse button<br />
to navigate to the location of the GSD file. If a bitmap picture<br />
representing the encoder is requested, make sure that the<br />
bitmap file is located in the same folder as the GSD file. A<br />
bitmap file is included in the zip-file avaliable from<br />
www.<strong>heidenhain</strong>.com.<br />
2. Select the GSD file and click the Install button to start installing<br />
the selected GSD file.
Change language