PGO PMX Sport (PM) servicemanual - Scootergrisen

F. Front Brake
1.Disassembling and assembling the front brake comp.
a. Remove the two bolts fixed on the frt brake comp from
the front fork.
b. To assemble the frt. brake comp, please reverse the
dismatling procedures.
Locking torque:
M8:2.0~3.0kg-m
2.The releasing of air from the frt brake comp.
The procedures:
a. Fill in the appropriate brake fluid to the storage tank.
b. When assembling the master cylinder cover, do not let
the brake fluid overflow from the
master cylinder of storage tank.
c. Put the spanner upon the drain screw of the caliper.
d. Lock and unlock the screw repeatedly to drain off the bubble.
e. Operate slowly the brake lever several times.
g. Loose the drain screw, then release the lever fully opened.
h. Lock the drain screw when the lever is fully opened.
i. Repeat the above procedures until all air within the brake system is released completely.
Locking torque of leaking screw:0.6kg-m