Peugeot workshop manual Jet Force (756739) - Scootergrisen

More documents

Recommendations

Info

Removal of the radiator / radiator bracket (50 and 125 cc) - Remove the front lower legshields (see procedure 1) - Remove the rear shield panel (see procedure 3) - Remove the fork guard (1) 2 fixing bolts without removing the guard - Remove the mudguard (2) - Drain off the coolant - Disconnect the radiator cooling system 4 pipes (3) - Remove the radiator (4) (4 bolts) - Unclip the deflector (5) - Disconnect the horn and immobiliser unit - Unclip the harness - Remove the radiator bracket (3 bolts) with its components (immobiliser unit, horn and header tank) Page : 30 MISCELLANEOUS OPERATIONS Reproduction or translation, even partial, are forbidden without the written consent of <strong>Peugeot</strong> Motocycles
Removal of the fuel gauge (50 cc) - Remove the storage compartment (see procedure 2) - Remove the tank cover panel (5 screws) - Remove the saddle pivot bracket (2 nuts) - Disconnect the fuel gauge (1) - Disconnect the return and vent pipes (2) from the sender unit - Unscrew and remove the fuel sender unit and its seal using plug wrench part number 756716 Reassembly: Re-assemble in the reverse order to dismantling - Tighten the fuel sender unit using plug wrench part number 756716 in order to position the arrow (A) between the marks (B) on the tank MISCELLANEOUS OPERATIONS Reproduction or translation, even partial, are forbidden without the written consent of <strong>Peugeot</strong> Motocycles Page : 31
Page 1 and 2: SALES DIVISION NETWORK TECHNICAL IN
Page 3 and 4: CONTENTS Removal of the storage com
Page 5 and 6: CHARACTERISTICS Engine CHARACTERIST
Page 7 and 8: SERVICE SCHEDULE AND COMMISSIONING
Page 9 and 10: TIGHTENING TORQUES Body panels TIGH
Page 11 and 12: INSTRUMENT CLUSTER Instrument clust
Page 13 and 14: INSTRUMENT CLUSTER Changing the dis
Page 15 and 16: CONTROL CABLE AND HARNESS ROUTINGS
Page 17 and 18: Left-hand side 125 cc CONTROL CABLE
Page 19 and 20: LOCATION OF COMPONENTS 50 cc 1. Inj
Page 21 and 22: BODY Location of body components (5
Page 23 and 24: Removal of the storage compartment
Page 25 and 26: - Remove the rear shield (6) (3 scr
Page 27 and 28: Removal of the frame (50 cc) This m
Page 29: MISCELLANEOUS OPERATIONS Removal of
Page 33 and 34: Removal of the fuel tank filler rin
Page 35 and 36: Removal of the radiator deflector (
Page 37 and 38: WORKING ON THE ENGINE WITHOUT REMOV
Page 39 and 40: SPECIAL WORK AND PROCEDURES WITHOUT
Page 45 and 46: Removal of the starter motor and/or
Page 47 and 48: ENGINE REMOVAL Removal of the 50 cc
Page 49 and 50: Removal of the fuel injector - Remo
Page 51 and 52: Removal of the fuel pump / of the f
Page 53 and 54: Removal of the rear brake pads or c
Page 55 and 56: Method of fitting the engine mounti
Page 57 and 58: 125 cc SPECIFIC WORK REQUIRING ENGI
Page 59 and 60: Reproduction or translation, even p

Peugeot workshop manual Jet Force (756739) - Scootergrisen

Create successful ePaper yourself

Delete template?

Save as template?