Peugeot workshop manual Jet Force (756739) - Scootergrisen
Peugeot workshop manual Jet Force (756739) - Scootergrisen
Peugeot workshop manual Jet Force (756739) - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SPECIAL WORK AND PROCEDURES WITHOUT REMOVING THE ENGINE<br />
Removal of the oil pump (50 cc)<br />
- Remove the storage compartment (see<br />
procedure 2)<br />
- Disconnect the engine casing separate<br />
lubrication pipe<br />
- Disconnect the oil pump (1)<br />
- Remove the oil pump fixing bolt<br />
- Disconnect the oil inlet pipe (2) from the<br />
pump<br />
- Remove the oil pump<br />
Important: Using the diagnostic tool bleed the<br />
oil pump (refer to the diagnostic tool user<br />
documentation for the injection engine)<br />
Check: Using the diagnostic tool, check for<br />
fault codes, clear them if necessary<br />
Removal of the fuel gauge (50 cc)<br />
- Remove the footboards (2 screws each)<br />
- Remove the tunnels (3 screws each)<br />
- Carry out the procedure used to lower the<br />
pressure in the fuel system (see instruction 6)<br />
- Disconnect the fuel gauge (1)<br />
- Remove the fuel pump (2) from its mounting<br />
- Clamp the fuel inlet hose with the hose clamp<br />
part number 755996<br />
- Disconnect the fuel inlet and outlet hoses (3)<br />
- Remove the fuel pump<br />
Reproduction or translation, even partial, are forbidden without the written consent of <strong>Peugeot</strong> Motocycles<br />
Page : 43
Change language