Peugeot workshop manual Jet Force (756739) - Scootergrisen
Peugeot workshop manual Jet Force (756739) - Scootergrisen
Peugeot workshop manual Jet Force (756739) - Scootergrisen
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Removal of the fuel injector<br />
- Remove the storage compartment (see<br />
procedure 2)<br />
- Disconnect the battery<br />
- Disconnect the fuel injector (1)<br />
- Disconnect the fuel feed hose (2) (1 clip, to be<br />
changed each time it is removed)<br />
- Remove the fuel injector (3) (1 bolt)<br />
Inspection: Connect the diagnostic tool and<br />
check there are no fault codes, erase them if<br />
necessary<br />
Removal of the oil pressure switch<br />
- Remove the exhaust elbow (1) (2 bolts and 2<br />
nuts)<br />
- Disconnect the pressure switch (2)<br />
- Remove the cylinder to casing fixing bolt (3)<br />
- Remove the oil pressure switch (2) and its<br />
seal<br />
Removal of the throttle unit<br />
- Remove the storage compartment (see<br />
procedure 2)<br />
- Disconnect the battery<br />
- Disconnect the atmospheric pressure sensor<br />
(1)<br />
- Disconnect the oil vapour return pipe (2)<br />
- Remove the air filter housing (3) (2 bolts)<br />
125 cc SPECIFIC MISCELLANEOUS WORK<br />
Reproduction or translation, even partial, are forbidden without the written consent of <strong>Peugeot</strong> Motocycles<br />
Page : 49
Change language