Peugeot workshop manual Jet Force (756739) - Scootergrisen
Peugeot workshop manual Jet Force (756739) - Scootergrisen
Peugeot workshop manual Jet Force (756739) - Scootergrisen
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Removal of the engine mounting twin linkrod<br />
- Remove the storage compartment (see<br />
procedure 2)<br />
- Remove the left-hand footboard and tunnel<br />
- Disconnect the battery<br />
- Disconnect the oil vapour return pipe to the<br />
air filter<br />
- Disconnect the atmospheric pressure sensor<br />
- Remove the air filter unit<br />
- Disconnect the starter motor, the idle valve<br />
and the fuel injector<br />
- Disconnect the magneto harness and engine<br />
harness connections<br />
- Slacken off the upper mounts (1) of the<br />
engine mounting twin linkrod (2)<br />
- Slacken off and remove the twin linkrod<br />
lower securing pin (3)<br />
Note: Suspend the machine or wedge it under<br />
the swingarm twin linkrod<br />
- Remove the twin linkrod upper fixing pins<br />
- Remove the twin linkrod and the 2 rubber<br />
bump stops (4)<br />
Page : 54<br />
125 cc SPECIFIC MISCELLANEOUS WORK<br />
Reproduction or translation, even partial, are forbidden without the written consent of <strong>Peugeot</strong> Motocycles
Change language