4 WinCC-Runtime 4.1 Start of the program without Auto Start

Reactor temperature TIC 01
TIC01 is operated as a standard controller
with one exception:
Tick box instead of
with the following meaning:
= Off means the set point will
be the one for the oil temperature.
= On means that the set
point refers to the temperature inside the
reactor.
Reactor temperature TIC 01L and TIC 01S
by liquid and solid feed.
TIC01L and TIC01S are operated as a
standard controller with one exception:
A set point for the flow rate can be given in
the field . This set point is the basis
flow the controller starts with. It should be the
equilibrium flow rate at this temperature.
Feed vessel temperature TIC 02
TIC02 is operated as a standard controller
with one exception:
Tick box instead of
with the following meaning:
= Off means the set point will
be the one for the oil temperature.
= On means that the set
point refers to the temperature inside the
feed vessel.
AP-Miniplant - Operation Manual Mini Batch Plant Page 36