User's Guide - Toro Media
User's Guide - Toro Media
User's Guide - Toro Media
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Input Power Connection - Indoor Models<br />
NOTE: Unlike most indoor-type controller models, the TMC-424E-ID model incorporates an internal<br />
transformer. A Class C power cord and strain relief are supplied for connection of the transformer<br />
terminal block to a grounded wall outlet.<br />
1. Remove the transformer compartment<br />
cover secured by two phillips screws.<br />
2. Referring to the illustration, install the strain<br />
relief and tighten securely using appropriate<br />
hand tools.<br />
NOTE: Power cord assembly will vary by<br />
controller model.<br />
3. Insert the power cord through the strain<br />
relief.<br />
4. Connect the power cord wires<br />
to the terminal block as follows:<br />
120 VAC Models:<br />
Black to L, White to N and Green<br />
to ground .<br />
230 VAC Models:<br />
Brown to L, Blue to N and Green/Yellow<br />
to ground .<br />
5. Tighten the bottom strain relief nut using an appropriate hand tool. Pull lightly on the power<br />
cord to confirm proper retention.<br />
24<br />
Black or<br />
Brown<br />
White or<br />
Blue<br />
Green/<br />
Yellow
Change language