arcmaster 400 s - Victor Technologies
arcmaster 400 s - Victor Technologies
arcmaster 400 s - Victor Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.02 Weld Parameter Description<br />
Par<br />
ameter<br />
HOT START<br />
A<br />
CONTACTOR<br />
REMOTE<br />
Figure 5 - ARCMASTER <strong>400</strong> S Front Panel with Parameter Description<br />
D escr<br />
iption<br />
ARCMASTER <strong>400</strong> S<br />
This parameter operates in STICK weld mode and is used to improve<br />
the start characteristics for stick electrodes. e.g. low hydrogen<br />
electrodes. It sets the peak start current on top of the (WELD) current.<br />
Weld Current (Amperage)- sets the STICK and TIG WELD current.<br />
ARC CONTROL - This parameter provides a suitable short circuit<br />
current in STICK welding to improve electrode sticking and arc<br />
stability.<br />
LIFT TIG mode of operation. A remote control device may be used for<br />
use during LIFT TIG operation. See section 4.01, section 2 “Remote<br />
Control Socket ”, for complete details of the remote device.<br />
STICK Mode of operation<br />
Contactor operation in STICK Mode<br />
Selects in operation Panel board or Remote<br />
Table 3 – Weld Parameter Descriptions<br />
March 31, 2006 4-3