Installatie instructie horizo... - Climarad

More documents

Recommendations

Info

Step 1. Decide position for ClimaRad and fixings Fig 1A: ClimaRad drill template D Fig 1B: Vensterbank The window-sill may not exceed this line to guarantee a good airflow < 104 D 60° >8 approx. 230 100 Fig 1C: Maesurements window-sill Ø112 levelling rod: <strong>horizo</strong>ntal ca. 650 486 Table 1D: Position of ClimaRad connections L = Radiatorlengte (mm) X = CV-aanvoer (mm) Y = CV-retour (mm) 1280** 580** 630** D= distance between finished floor and bottom of the window-sill Radiatorhoogte CH-connections can also be placed on the left side. Please make sure that the wall power-outlet is not in the way. 1440 620 670 1600 700 750 D (mm) (mm) 500 >625 600 >725 1760 780 830 486 1.1 Determine the position of the ClimaRad using the ClimaRad drill template. Mark the centre-cross on the wall with a pencil (see figure 1A) Note: the airflow opening above the ClimaRad ventilation-unit must adhere to figure 1B. For tandem: see 1E and 1F. Note! When connections are made on the bottom right, the radiator must be mounted 40 mm. off-centre to the left. When connections are made on the bottom left, the radiator must be mounted 40 mm. off-centre to the right. 1.2 Decide the position for the CH-connections and the power socket. Use figure 1C and table 1D to determine the measurements. 1.3 Install the power socket and the CHconnections (see also Step 2). 1920 860 910 Y Ø112 CH supply 2080 940 990 2240 1020 1070 50 2 x 1/2” 30 CH return *Radiator length 1280 needs to be mounted asymmetrically. When connections are made on the bottom right, the radiator must be mounted 40 mm. off-centre to the left. When connections are made on the bottom left, the radiator has to be mounted 40 mm. off-centre to the right. Please keep in mind the available space to the walls. at least 376 2400 1100 1150 >8mm (see Fig.1B) at least 451 at least 485 2720 1260 1310 3040 1420 1470
Figure 1E: Measures Tandem window-sill Radiatoren worden standaard voorzien van rechter onderaansluiting voorzien CH supply CH Return Table 1F: Measures ClimaRad tandem 3040 2720 L = Radiatorlength (mm) 1640 1320 S =Stabmeasure (mm) 820 660 ½S= half stabmeasure (mm)
Page 1 and 2: Version 2010.001 EN Instructions fo
Page 3: Index: Index Step 1. Determining th
Page 7 and 8: Step 3. Drilling the inner leaf of
Page 9 and 10: 4-1C 4-1D 4-1E 1 lekrand onder ! 2X
Page 11 and 12: 4-2D 4-2E 4-2F 1 2X lekrand onder !
Page 13 and 14: Step 5. Attach wall plates and radi
Page 15 and 16: Step 6.Fitting the ClimaRad ventila
Page 17 and 18: 7F 7G 7H adjust 2X turn adjustment
Page 19 and 20: 9A 9B 9C 9D main switch 9.1 Close t
Page 21: 10E 10.5 B Connecting the in-betwee

Installatie instructie horizo... - Climarad

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?