2001 - Bengts Cykel & Motor

TRACK TENSION AND ALIGNMENT
NOTE: We recommend you to visit authorized LYNX-service point for checking track tension.
They use belt tension tester (P/N 414 348 200).
A belt tension tester may be used to measure deflection as well as force applied.
Belt tension tester (P/N 414 348 200)
Track adjustment
1. 7,3 kg
2. Deflection
NOTE: Ride the snowmobile in snow about 15-20 minutes prior to adjusting track tension.
Lift rear of snowmobile and support it with a snowmobile mechanical stand.
Allow the suspension to extend normally and check gap half-way along slider shoe.
The gap should be as given in the specification section of this guide.
If the track tension is too loose, track will have tendency to thumb.
OPERATOR’S MANUAL ____________________________________ 41
ENGLISH