Tools to convert, debug and - FEFlow

More documents

Recommendations

Info

‘set_lin_id’ usage: set_lin_id [-id ID-value] ascii_line_file The color of line background maps in FEFLOW will be computed from the LINE-ID. 4 colors are used. They are defined using the ‘modulo’-operator on the ID: color=Line-ID % 4. Use set_lin_id to change the background map color. ‘tin2trp’ usage: tin2trp [-sort] [-f factor] ascii_tin_file Data from the ArcInfo TIN module can be exported using the ASCII TIN format. tin2trp converts these data into the FEFLOW supported format. The Z-coordinate can be scaled to compute the function value in the program output. This is a good basis for FEFLOW’s regionalization tools to compute slice elevations or other parameter distribitions.
‘trp2grid’ usage: trp2grid [-min | -max | -average | -sum ] [-x grid_x_origin] [-y grid_y_origin] [-w grid_width] trp_file If triplets are to be converted into a quadratic raster grid you can use trp2grid. Further conversions on the grid file may also be performed using the debug_trp program (e.g. from Row/Column coordinates into the real world coordinates of the cell-center point).
Page 1 and 2: FEFLOW Data Tools - Tools to conver
Page 3 and 4: Further development of the FEFLOW d
Page 5 and 6: trp2pnt [-f factor] trp_file trp2gr
Page 7 and 8: ‘mix_trp’ usage: mix_trp [-disc
Page 9: ‘mix_pnt+trp’ usage: mix_pnt+tr
Page 13 and 14: ‘debug_pow’ usage: debug_pow [-
Page 15 and 16: ‘mix_pow_id’ usage: mix_pow_id
Page 17 and 18: This program produces powerfunction
Page 19 and 20: ‘grid2trp’ usage: grid2trp grid

Tools to convert, debug and - FEFlow

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?