DUPREX 5000 Series RF INSTALLATION GUIDE - Galaxy Control ...

More documents

Recommendations

Info

Mounting the units-Hardware There are two sets of mounting holes provided. The first set of mounting holes consists of the four corner channels that are also used to mount the cover plate screws. Four mounting screws can be threaded through the corner holes. This also is advantageous in that the screws do not breach any of the environmental seals. Mounting screws are not included due to the infinite variety of potential mounting surfaces. Select a type of mounting screw based on the type of material. Placement of screw in corner channel. Fasten screws in place with long handled screwdriver. Corner Channel Mounting Screws Screw placed into channel. ©2005 Cypress Computer Systems,Inc. • www.cypressworld.com 2/18/05 Page 16
Plastic Nut With the units physically mounted. Pass the electrical cable through the watertight strain relief. It is recommended that all electrical connections enter through a single multi conductor cable. This will maintain the maximum resistance to the entry of debris and moisture. Individual cables and wires can be bundled and taped together and then passed through the connector if necessary. Connector Rubber Seal Electrical Connections Ring Washer Connector Hub With wires placed through the connector as shown, tighten Hub until rubber seal grips cable. Electrical connections can now be made. A quick reference diagram is included on the unit covers and in the beginning of this document. Details on the type and function of the individual connections are contained in the DPX-7000 manual. The DPX-7000 manual is included as part of the <strong>RF</strong> unit documentation package. All documents are available on the web at www.cypresscom.com Double check electrical connections and apply power to both units. The Green power LED should always be illuminated if power is applied. If this LED is not illuminated there is a power problem, or a problem with the unit. ©2005 Cypress Computer Systems,Inc. • www.cypressworld.com 2/18/05 Page 17
Page 1 and 2: DUPREX 5000 Series RF INSTALLATION
Page 3 and 4: DIP Switch Settings- Quick Referenc
Page 5 and 6: The Cypress Duprex RF is the newest
Page 7 and 8: The Duprex RF package should contai
Page 9 and 10: Initial power up Plug in the Remote
Page 11 and 12: The RF units are capable on operati
Page 13 and 14: Mounting the units. A site evaluati
Page 15: The other mounting method utilizes

DUPREX 5000 Series RF INSTALLATION GUIDE - Galaxy Control ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?