Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Service<br />
Guide<br />
<strong>ColorPage</strong>-<strong>Vivid</strong> <strong>4X</strong> <strong>USB</strong><br />
Chapter 4.<br />
Important Notes<br />
Packing requirement for sending the PCB assembly<br />
PCB assembly is a kind of sophisticated electronic circuit board. A scanner mainly includes<br />
the following items: Scan Board, CCD Board, Switch Board, Panel Board, etc.. Therefore,<br />
well packing will be required when sending them by post or courier.<br />
1. Some sophisticated IC components are mounted on the PCB assembly, hence it is necessary to<br />
pack each PCB assembly with a separate static protecting beg, in order to avoid static<br />
electricity.<br />
2. CCD sensor is the most important component on the CCD Board, hence, CCD sensor must be<br />
covered by a protecting sheet (shown as below) when mailing it, in order to prevent from<br />
scratch.<br />
CCD sensor, covered by a screen<br />
protecting sheet<br />
3. Reliable external packing is also very important when sending the PCB assembly by post, in<br />
that it would avoid unnecessarily lost or damage.<br />
Short of spare parts while repairing a scanner<br />
If you are short of spare parts when you have some scanners waiting to be repaired, it would be<br />
recommended to take the necessary parts from one scanner, so that you may have the as many<br />
as scanners be repaired and sent back to your customer, and left only one or few scanners<br />
waiting for spare parts sending from KYE.<br />
24