ESP Jib REEfing & fuRling unit 1, 2, 3 - Harken
ESP Jib REEfing & fuRling unit 1, 2, 3 - Harken
ESP Jib REEfing & fuRling unit 1, 2, 3 - Harken
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Assembly<br />
Leg Kit with Toggle Assembly<br />
19a. Make sure flat holes in leg line up with threaded crosspin flats.<br />
Line up flats<br />
19b. Secure using washers and locknuts.<br />
Tools: Socket or Open End Wrench<br />
Unit<br />
Size<br />
2 16 mm<br />
3 18 mm<br />
If stay length is set, use side cutters<br />
or needlenose pliers to bend cotter<br />
pin to secure turnbuckle.<br />
20. Capture legs in one of the two collars.<br />
Tip: If the legs do not fit collar, loosen<br />
Locknuts at threaded crosspin.<br />
Collar<br />
20 <strong>ESP</strong> Unit 2, 3
Change language