CMG-DCM / AM - Güralp Systems Limited

More documents

Recommendations

Info

<strong>CMG</strong>-<strong>DCM</strong> Data Communications Module Slide the disk out and replace with another Lacie U&I drive, or any brand of IDE / USB or IEEE 1394 2.5” drive you specify (at the time of manufacture). You can do this at any time without losing data. 7. Plug the hard disk into any computer that supports the USB Mass Storage standard using a standard USB cable. Newer Linux distributions and Microsoft Windows XP have this enabled by default. In Windows XP, you should see a series of Found new hardware messages indicating that the drive has been recognised. A new disk drive icon should appear in My Computer: 26 Issue F
This process may take several minutes to complete. Operator's guide 8. Double click on the drive's entry to browse the files inside and copy them to your data store. Alternatively, you can open the files directly from the USB disk using Scream! or other GCF-compatible software. 9. When you want to remove the USB disk, double-click on the Safely Remove Hardware button: 10.Choose the USB port attached to the disk, and click Stop. December 2006 27
Page 1 and 2: CMG-DCM / AM Data Communications Mo
Page 3 and 4: Operator's guide 5.7 SEED name mapp
Page 5 and 6: 1 Introduction Operator's guide The
Page 7 and 8: Operator's guide This form of DCM u
Page 9 and 10: Operator's guide • Both mgetty an
Page 11 and 12: Operator's guide 2 Installing the C
Page 13 and 14: Operator's guide Windows, can be us
Page 15 and 16: Operator's guide connect it directl
Page 17 and 18: Operator's guide 6. If you are conn
Page 19 and 20: Operator's guide ports are connecte
Page 21 and 22: • the current Linux network and D
Page 23 and 24: Operator's guide When you are done,
Page 25: Operator's guide 2. Connect the DAT
Page 29 and 30: Operator's guide With a sufficientl
Page 31 and 32: Operator's guide the inputs from an
Page 33 and 34: interface by typing its IP address
Page 35 and 36: Operator's guide The DCM allows you
Page 37 and 38: DCM, separated by a colon : (e.g. 1
Page 39 and 40: Operator's guide gcf_out service on
Page 41 and 42: Operator's guide viewer window. If
Page 43 and 44: Operator's guide The DCM receives s
Page 45 and 46: Operator's guide info::logging into
Page 47 and 48: Operator's guide If it reports that
Page 49 and 50: Operator's guide are used by openss
Page 51 and 52: 4 Tools 4.1 Summary Operator's guid
Page 53 and 54: Operator's guide 3 open (never) Wed
Page 55 and 56: Operator's guide process and run a
Page 57 and 58: Operator's guide • a zeroing butt
Page 59 and 60: 4.5 Disk files Operator's guide Fin
Page 61 and 62: Operator's guide By default, the mo
Page 63 and 64: Operator's guide Each entry include
Page 65 and 66: Operator's guide yes if you want to
Page 67 and 68: Operator's guide The following conf
Page 69 and 70: Operator's guide dssserver fulfils
Page 71 and 72: Operator's guide datatransfer.cd1.s
Page 73 and 74: Operator's guide default: to make t
Page 75 and 76: Operator's guide /etc/libcd11/slotx
Page 77 and 78:
Operator's guide • Enter values i
Page 79 and 80:
Operator's guide 5.9 HTTP server In
Page 81 and 82:
6.1 General Operator's guide severa
Page 83 and 84:
Operator's guide Configure : This c
Page 85 and 86:
Operator's guide normally operate a
Page 87 and 88:
Operator's guide If you want to che
Page 89 and 90:
Operator's guide system log onto th
Page 91 and 92:
Operator's guide Files are given na
Page 93 and 94:
Operator's guide • a SEED locatio
Page 95 and 96:
Operator's guide has no effect. If
Page 97 and 98:
Operator's guide net.dns.search : I
Page 99 and 100:
Operator's guide the net.mail.out.t
Page 101 and 102:
Operator's guide • the content of
Page 103 and 104:
Operator's guide 6.13 Administrator
Page 105 and 106:
7 Configuring digitizers Operator's
Page 107 and 108:
Operator's guide GPS Power Cycle :
Page 109 and 110:
Operator's guide 7.3 Trigger criter
Page 111 and 112:
Operator's guide Usually, the value
Page 113 and 114:
Operator's guide 7.5 Sensor mass co
Page 115 and 116:
Operator's guide Once the data is s
Page 117 and 118:
Operator's guide moving files when
Page 119 and 120:
Operator's guide certain options ar
Page 121 and 122:
Operator's guide will ask you if yo
Page 123 and 124:
Operator's guide centred; • which
Page 125 and 126:
Operator's guide The firmware Reins
Page 127 and 128:
Operator's guide 9 Connector pinout
Page 129 and 130:
Operator's guide 9.2 Integrated DCM
Page 131 and 132:
Operator's guide 10.2 Digitizer typ
show all

CMG-DCM / AM - Güralp Systems Limited

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?