SyCon System Configurator netLINK - Hilscher
SyCon System Configurator netLINK - Hilscher
SyCon System Configurator netLINK - Hilscher
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SyCon</strong> <strong>System</strong> <strong>Configurator</strong> <strong>netLINK</strong> Settings • 29<br />
The device NL50-MPI supports the automatic baudrate detection.<br />
The devices NL-MPI and NT40-MPI do not support the automatic baudrate<br />
detection.<br />
To set the automatic baudrate detection, select in the list of Bus profile the<br />
setting PROFIBUS and then select in the list Baud rate the setting<br />
AutoBaud.<br />
Figure 15: Settings > NetLink Parameter > PROFIBUS > Autobaud<br />
Caution: The automatic detection of the PROFIBUS baudrate can only be<br />
used, when the control unit sends the PROFIBUS parameters on the<br />
PROFIBUS network.<br />
Note: A download of the configuration has to be done to activate these<br />
setting in the device.<br />
<strong>Hilscher</strong> Gesellschaft für <strong>System</strong>automation mbH – Rheinstr. 15 – D 65795 Hattersheim<br />
Edition 3 – Oi:<strong>SyCon</strong> <strong>netLINK</strong>#EN 2008/06
Change language