The marine fastener. - Hilti

The marine fastener.
Hilti X-BT threaded fastener
On land, at sea, to
steel – it’s the revolutionary
fastener that
makes rework a thing
of the past.

Work without rework –
the X-BT fastening system.
X-BT is an innovative way of fastening to
pre-painted steel without damaging the
surface. X-BT is designed to work on construction
steels as thin as 8 mm ( 5 /16″)
without through-penetration. Made of A4
(AISI 316) stainless steel, X-BT performance
in corrosive environments is exceptional
and makes it the perfect fastening solution
for the offshore, shipbuilding and petrochemical
industries.
Hilti X-BT-R stud fasteners
A4 (AISI 316) stainless steel
Efficient
■ No rework
■ 100 studs per hour can be easily
set by one user
■ No through-penetration of base
material
Grating and outfitting
Durable
■ Highly corrosion-resistant A4
(AISI 316) stainless steel
■ High loading and pullout values
equal, if not surpass, most
conventional techniques
Simple
■ Easy to use
■ No electrical cords or heavy
equipment required
Flexible
■ Works on most steel shapes and
thicknesses down to 8 mm ( 5 /16″)
■ Ideal for high strength as well as
standard construction steel
Cable tray, channel, strut
Hilti X-CR fasteners
A4 (AISI 316) stainless steel
■ Use where through-penetration
is not an issue
■ Where surface painting takes
place after setting
Light duty electrical (T-Bars)

Stud welding
Eliminate rework
X-BT-R stud
Tedious and time-consuming rework
commonly associated with stud welding
disappears with X-BT. The stud with
sealing washer is cleanly set in a small
pre-drilled hole.
Fasten to all steel shapes
X-BT works great on most steel shapes
including tubulars, channel sections, wide
flanges and angles. Forget the limitations
usually found with clamps.
Welded zone
X-BT-R stud
Base steel
Enjoy peace of mind
The unique fastening technique of X-BT
creates a true weld of the stud to the base
material ensuring high holding values.

X-BT program
X-BT Stainless Steel Threaded Studs
Ordering designation Thread diameter Thread length Quantity Item no.
X-BT M8-15-6 SN12-R M8 15 100 377074
X-BT M10-24-6 SN12-R M10 24 100 377078
X-BT W10-24-6 SN12-R W10 24 100 377076
Box comprises: 100 studs, 1 power regulation guide, 1 coating protector, 1 TX-BT step drill bit
X-BT stainless steel threaded studs, also available without sealing washer
Cartridges
Ordering designation Quantity Item no.
6.8/11M “high precision*” brown cartridge 100 377204
* “high precision” is a narrow energy band at a specific energy level
Tools
Ordering designation For use with Quantity Item no.
X-BT Set M10/W10 1 000000
X-BTG Set M8 1 000000
Comprises: 1 DX 351 BT or BTG powder actuated tool, 1 BT cleaning kit,
1 X-BT 4000-A cordless drill, 1 charger, 2 batteries, 1 information sheet,
1 spray lube, 3 operating instructions, packed complete in a Hilti toolbox.
More added value solutions from Hilti.
Installation
Increase productivity and save time with
Hilti’s complete range of installation
systems. Our systems include pipe hangers,
strut, connectors as well as the
necessary design software. We also offer
a stainless steel program for optimum
corrosion prevention.
Positioning
Hilti’s positioning tools make measuring,
leveling and vertical alignment easier,
quicker and more accurate. Measuring
distances, which was difficult or
impossible in the past, is now easy with
the Hilti PD 22 or PD 28 laser measurement
tools.
Screw fastening
Hilti has a wide range of cordless and
electric screwdrivers. Components for
screwdriver systems such as inserts,
attachments and bits complete the
program. Also available are screws for
various base materials and applications.
Hilti Corporation
FL-9494 Schaan
Principality of Liechtenstein
www.hilti.com
Hilti = registered trademark of Hilti Corp., Schaan W 2817 0403 100-e 1 Printed in Liechtenstein © 2003 Right of technical and programme changes reserved S.E.&O.