Experiment 5 â Coupler Design.

More documents

Recommendations

Info

Figure 4 - Zooming in to the end of the strip. 6. Pick the face of the end of the strip, as shown in Figure 5. 14
Figure5-Pickingthefaceoftheendofthestrip. 7. Choose ’Rotate’, press ’ESC’ and then define a rotation axis numerically, as shown in Figure 6. Figure 6 - Coordinations of rotation axis. 8. Choose ’Rotate’ again and define the curved edge of the line, as shown in Figure 7. 15
Page 1 and 2: Experiment5—CouplerDesign. Dr. H
Page 3 and 4: 3. For a 20 dB three sections edge
Page 5 and 6: Forward wave 1 2 Through wave Sampl
Page 7 and 8: 1+C Z 0e = Z 0 1 − C , (2) r 1
Page 9 and 10: Because of the symmetry of the stru
Page 11 and 12: SSub SSUB SSub1 Er=4.7 Mur=1 B=0.32
Page 13: Figure 3 - Defining the first strip
Page 17 and 18: 1. Add the curved edge to the first
Page 19 and 20: Figure 11 - Mirroring again the str
Page 21 and 22: 4.2.3 Calculating the Even and Odd
Page 23 and 24: Press on the ’Define Pins...’ b
Page 25 and 26: Figure 19 - Odd mode definition. 7.
Page 27: 4.4 Final Report Requirements 1. At

Experiment 5 â Coupler Design.

Create successful ePaper yourself

Delete template?

Save as template?

Experiment 5 â Coupler Design.