User Manual

More documents

Recommendations

Info

Accessing the system board to install internal options CAUTION—SHOCK HAZARD: If you are installing memory or option cards sometime after setting up the printer, then turn the printer off and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going to the printer. Note: This task requires a flathead screwdriver. 1 Remove the cover. a Turn the screws on the cover counterclockwise to loosen them, but do not remove them. Additional printer setup 24
Lift up on the tabs to align each screw with the corresponding keyhole. c Pull the cover forward to remove it. 2 Use the following illustration to locate the appropriate connector. Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors. Additional printer setup 25
Page 1 and 2: X73x Series User's Guide May 2009 w
Page 3 and 4: Loading the multipurpose feeder....
Page 5 and 6: Cleaning the printhead lenses......
Page 7 and 8: Safety information Connect the powe
Page 9 and 10: Learning about the printer Thank yo
Page 11 and 12: 1 100 mm (3.9 in.) 2 100 mm (3.9 in
Page 13 and 14: Configured model 1 Automatic Docume
Page 15 and 16: Using the security lock feature The
Page 17 and 18: Item Description 6 Start • Press
Page 19 and 20: Display item Cancel Jobs Function O
Page 21 and 22: Button Selected radio button Functi
Page 23: Additional printer setup Installing
Page 27 and 28: 3 Open the memory card connector la
Page 29 and 30: Notes: • The entire length of the
Page 31 and 32: c Remove the printer hard disk by p
Page 33 and 34: 7 Lower the ISP toward the plastic
Page 35 and 36: Installing a printer hard disk The
Page 37 and 38: To install a printer hard disk dire
Page 39 and 40: 2 Slide the cover down, and then tu
Page 41 and 42: Attaching cables Connect the printe
Page 43 and 44: Verifying printer setup Once all ha
Page 45 and 46: 7 Under Available Options, add any
Page 47 and 48: Do not connect the USB cable until
Page 49 and 50: Configure the printer for wireless
Page 51 and 52: For Windows users 1 Insert the Soft
Page 53 and 54: Changing port settings after instal
Page 55 and 56: i j Select the printer from the lis
Page 57 and 58: Minimizing your printer's environme
Page 59 and 60: 3 Touch General Settings. 4 Touch E
Page 61 and 62: Using the printer control panel 1 M
Page 63 and 64: Loading paper and specialty media T
Page 65 and 66: 4 Flex a stack of paper back and fo
Page 67 and 68: 1 Press the tray release latch to t
Page 69 and 70: Loading the 2000-sheet tray 1 Pull
Page 71 and 72: Single-sided printing Duplex (two-s
Page 73 and 74: Changing a Custom Type name You ca
Page 75 and 76:
Fiber content Most high-quality xer
Page 77 and 78:
Supported paper sizes, types, and w
Page 79 and 80:
Paper type Standard 550-sheet tray
Page 81 and 82:
• Page orientation is important w
Page 83 and 84:
Printing confidential and other hel
Page 85 and 86:
Printing from a flash drive A USB p
Page 87 and 88:
3 Touch Reports. 4 Touch the down a
Page 89 and 90:
3 Press Enter, or click OK. The pri
Page 91 and 92:
Copying using the scanner glass 1 P
Page 93 and 94:
Making copies using paper from a se
Page 95 and 96:
4 From the Scale area, touch the ar
Page 97 and 98:
9 Touch Done. 10 Touch Copy It. Cre
Page 99 and 100:
6 Touch the button containing the o
Page 101 and 102:
Paper Saver This option lets you pr
Page 103 and 104:
E-mailing ADF Scanner glass Use the
Page 105 and 106:
E-mailing a document Sending an e-m
Page 107 and 108:
• JPEG—Creates and attaches a s
Page 109 and 110:
Faxing Note: Fax capabilities may n
Page 111 and 112:
5 Click inside the Station Name box
Page 113 and 114:
Notes: • Make sure the terminal a
Page 115 and 116:
Use one of the following methods: A
Page 117 and 118:
Use one of the following methods: A
Page 119 and 120:
3 Connect the adapter into the N sl
Page 121 and 122:
3 Remove the protective plug from t
Page 123 and 124:
Turning daylight saving time on or
Page 125 and 126:
7 Verify that the shortcut name and
Page 127 and 128:
7 Touch Delayed Send. Note: If Fax
Page 129 and 130:
Resolution This options increases h
Page 131 and 132:
Forwarding a fax This option lets y
Page 133 and 134:
Scanning to an FTP address using a
Page 135 and 136:
Send As This option sets the output
Page 137 and 138:
Scanning to a computer or flash dri
Page 139 and 140:
Format Type This option sets the ou
Page 141 and 142:
Understanding printer menus Menus l
Page 143 and 144:
Paper menu Default Source menu Menu
Page 145 and 146:
Menu item MP Feeder Type Plain Pape
Page 147 and 148:
Paper Texture menu Menu item Plain
Page 149 and 150:
Menu item Card Stock Weight Light N
Page 151 and 152:
Menu item Heavy Glossy Loading Dupl
Page 153 and 154:
Custom Scan Sizes menu Menu item Cu
Page 155 and 156:
Menu item Wireless Setup Page Descr
Page 157 and 158:
Menu item Network Buffer Auto 3K to
Page 159 and 160:
Network/Ports ª Standard Network o
Page 161 and 162:
Network/Ports ª Standard Network o
Page 163 and 164:
LexLink menu This menu is available
Page 165 and 166:
Parallel menu Menu item PCL SmartS
Page 167 and 168:
Menu item ENA Netmask ... ENA gatew
Page 169 and 170:
Menu item Baud 1200 2400 4800 9600
Page 171 and 172:
Menu item Job Expiration Off 1 hour
Page 173 and 174:
Menu item Delete Log Delete now Do
Page 175 and 176:
Menu item Quiet Mode Off (Image/Pho
Page 177 and 178:
Menu item Displayed Information Lef
Page 179 and 180:
Menu item Output Lighting Standard
Page 181 and 182:
Menu item Timeouts Wait Timeout Dis
Page 183 and 184:
Menu item Print Page Borders On Off
Page 185 and 186:
Menu item Header/Footer Bottom left
Page 187 and 188:
Menu item Mirror Image On Off Negat
Page 189 and 190:
Menu item Cancel Faxes Allow Don't
Page 191 and 192:
Menu item Dial Mode Tone Pulse Max
Page 193 and 194:
Menu item Max Speed 2400 4800 9600
Page 195 and 196:
Menu item Triple Ring On Off Descri
Page 197 and 198:
Menu item E-mail Server Setup Max E
Page 199 and 200:
Menu item JPEG Quality Best for con
Page 201 and 202:
FTP Settings menu Menu item Format
Page 203 and 204:
Menu item Use Multi-Page TIFF On Of
Page 205 and 206:
Menu item Resolution 75 150 200 300
Page 207 and 208:
Menu item Color Dropout Color Dropo
Page 209 and 210:
Separator Sheets None Between Copie
Page 211 and 212:
Menu item Resource Save On Off Desc
Page 213 and 214:
Menu item N-up Border None Solid De
Page 215 and 216:
Menu item Manual Color RGB Image Vi
Page 217 and 218:
Menu item LCD Contrast 1-10 Descrip
Page 219 and 220:
Menu item PCL Emulation Settings Pi
Page 221 and 222:
HTML menu Menu item Font Name Alber
Page 223 and 224:
PictBridge menu Menu item Photo Siz
Page 225 and 226:
Maintaining the printer Periodicall
Page 227 and 228:
3 Open the ADF cover. 4 Remove the
Page 229 and 230:
9 Pull the flap up as shown, and th
Page 231 and 232:
6 Close the lower front door, and t
Page 233 and 234:
Checking the status of supplies A m
Page 235 and 236:
Replacing Supplies Replacing a phot
Page 237 and 238:
7 Close the lower front door, and t
Page 239 and 240:
6 Unpack a new cartridge. 7 Place t
Page 241 and 242:
Note: It is recommended that the AD
Page 243 and 244:
Replacing the separator pad 1 With
Page 245 and 246:
3 Open the flap to access the senso
Page 247 and 248:
3 Replace the air filter, and then
Page 249 and 250:
Moving the printer to another locat
Page 251 and 252:
To set up e-mail alerts: 1 Type the
Page 253 and 254:
Understanding printer messages Chan
Page 255 and 256:
Load manual feeder with is a pape
Page 257 and 258:
• Install additional printer memo
Page 259 and 260:
59 Incompatible tray Try one or mo
Page 261 and 262:
3 Firmly shake the cartridge side-t
Page 263 and 264:
Understanding jam messages The foll
Page 265 and 266:
5 Close the upper front door. 6 Tou
Page 267 and 268:
4 Align the fuser unit using the ha
Page 269 and 270:
Lift the handholds on each side of
Page 271 and 272:
3 Pull the jam straight up to remov
Page 273 and 274:
Paper jammed in front of Tray 1 1 O
Page 275 and 276:
3 Touch Continue. 290-294 paper jam
Page 277 and 278:
CHECK TO SEE IF THE STANDARD EXIT B
Page 279 and 280:
Tray linking does not work These ar
Page 281 and 282:
CHECK THE DISPLAY FOR ERROR MESSAGE
Page 283 and 284:
Scanning takes too long or freezes
Page 285 and 286:
CHECK THE PRINTER CONNECTIONS Make
Page 287 and 288:
Can receive but not send faxes Thes
Page 289 and 290:
3 Make sure the paper tray closes p
Page 291 and 292:
5 Touch the down arrow until Print
Page 293 and 294:
ADJUST THE COLOR ALIGNMENT 1 Turn t
Page 295 and 296:
These are possible solutions. Try o
Page 297 and 298:
Print is too dark These are possibl
Page 299 and 300:
REPEATING MARKS OCCUR IN ALL COLORS
Page 301 and 302:
Toner fog or background shading app
Page 303 and 304:
A TONER CARTRIDGE MAY BE WORN OR DE
Page 305 and 306:
Object type CMYK Image CMYK Text CM
Page 307 and 308:
Notices Product information Product
Page 309 and 310:
Stempel Garamond Taffy Times New Ro
Page 311 and 312:
Laser advisory label A laser notice
Page 313 and 314:
Notice to users of the US telephone
Page 315 and 316:
Notice to users of the New Zealand
Page 317 and 318:
Industry Canada (Canada) This devic
Page 319 and 320:
Suomi Français Magyar Íslenska It
Page 321 and 322:
—Maintenance by anyone other than
Page 323 and 324:
3 LIMITATION OF REMEDY. TO THE MAXI
Page 325 and 326:
17 AGREEMENT TO CONTRACT ELECTRONIC
Page 327 and 328:
conservation settings brightness, a
Page 329 and 330:
transparencies 66 trays 64 lock, se
Page 331 and 332:
88 cartridge nearly low 237, 260 8
Page 333:
troubleshooting, scan cannot scan f
show all

User Manual

Create successful ePaper yourself

Delete template?

Save as template?