14.01.2014 Views

User Manual

User Manual

User Manual

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

1 Fax card connector<br />

2 Firmware and flash memory card connectors<br />

3 Hard disk connector<br />

4 Internal print server connector<br />

5 Memory card connector<br />

Installing a memory card<br />

CAUTION—SHOCK HAZARD: If you are installing memory or option cards sometime after setting up the printer,<br />

then turn the printer off and unplug the power cord from the wall outlet before continuing. If you have any other<br />

devices attached to the printer, then turn them off as well and unplug any cables going to the printer.<br />

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch<br />

something metal on the printer before touching any system board electronic components or connectors.<br />

An optional memory card can be purchased separately and attached to the system board. To install the memory<br />

card:<br />

1 Access the system board.<br />

Note: This task requires a flathead screwdriver.<br />

2 Unpack the memory card.<br />

Note: Avoid touching the connection points along the edge of the card.<br />

Additional printer setup<br />

26

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!