Pfeiffer, TC 400, Electronic Drive Unit, Operating_Instructions
Pfeiffer, TC 400, Electronic Drive Unit, Operating_Instructions
Pfeiffer, TC 400, Electronic Drive Unit, Operating_Instructions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connection "RS485"<br />
6.3 Cross-linking via the connection RS485<br />
M12<br />
USB/RS485-converter<br />
D+<br />
<strong>TC</strong>/TM<br />
<strong>TC</strong>/TM<br />
USB/RS485-converter<br />
D-<br />
RS 485<br />
USB<br />
PC<br />
RJ45<br />
<strong>TC</strong> 600 / 750<br />
CAUTION<br />
Danger of electric shock<br />
The insulation measures of the bus system are designed only for use with safety extralow<br />
voltage.<br />
Connect only suitable devices to the bus system.<br />
Establish the connections according to the specification of the interface RS485.<br />
Connect all units with D+ and D- to the bus.<br />
• The group address of the electronic drive unit is 962.<br />
• All units connected to the bus must have differing RS485 device addresses<br />
[P:797].<br />
13
Change language