TB100MW9 DTV Digital to Analog Converter (Set Top Box) - Funai

Advanced Operation
Adjusting Antenna
You can verify the signal strength of each channel.
1 Select a channel to adjust using [the
Number buttons] or [CH K / L].
2 Press [SETUP].
3 Select “CHANNEL” using [ K / L ],
then press [OK].
4 Select “ANTENNA” using [ K / L ],
then press [OK].
CHANNEL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
AUTOSCAN
• STB starts receiving the signal for the
channel.
5 By referring to the on-screen
indication, adjust the antenna’s
direction to get the best reception.
Status bar:
Stretches to the right as the signal
strength gets stronger.
ANTENNA
EXIT
CHANNEL
TIME
DETAIL
INITIAL
WEAK
NOW
10
BACK
10.1
STRONG
50
PEAK
Peak indicator:
Indicates the highest strength ever
reached.
Selecting Display Mode
You can adjust the aspect ratio of the digital TV
program to fit your 4:3 TV monitor.
Display Mode
1 Press [SETUP].
2 Select “DETAIL” using [ K / L ], then
press [OK].
SETUP
EXIT
CHANNEL
TIME
DETAIL
INITIAL
V-CHIP
CLOSED CAPTION
DISPLAY MODE LETTERBOX
AUTO POWER DOWN 4 HOURS
3 Select “DISPLAY MODE” using [ K / L ],
then press [OK].
DETAIL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
V-CHIP
CLOSED CAPTION
DISPLAY MODE LETTERBOX
AUTO POWER DOWN 4 HOURS
4 Select the desired display mode
using [ K / L ], then press [OK].
*
Descriptions of each settings are explained
in the “Information on Display Mode” on the
next page.
Select display mode.
LETTERBOX
ZOOM
FULL
5 Press [SETUP] to exit.
To adjust other channels:
Select the channel using [CH K / L], then adjust
it.
6 Press [SETUP] to exit.
20
EN