Vol.45 - Protel
Vol.45 - Protel
Vol.45 - Protel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Sleep function release (PAT.P)<br />
Sleep mode can be exited by touching a wet sponge with the tip to<br />
cause temperature fluctuation.<br />
Shutdown function<br />
The unit automatically shuts down when not used for a preset<br />
period of time. The unit turns itself off, if you forget to.<br />
Shutdown function<br />
When the unit is not<br />
operated during the<br />
preset time, the unit<br />
is automatically shutdown.<br />
Even if the user<br />
forgets to turn OFF the<br />
unit, this Shutdown<br />
function works to keep<br />
the unit inactive and<br />
prevents accidents.<br />
Advanced Alarm Function (To prevent overheating)<br />
Alarm sounds if the iron is left in contact with the component<br />
longer than the specified/set time. This prevents inexperienced<br />
operators from overheating the component, and in turn helping<br />
quality control.<br />
Soldering-time Alarm<br />
Tip temperatrue<br />
3<br />
5.4<br />
8.5<br />
RX-80HRT-BM<br />
3.2<br />
0.5<br />
10<br />
45˚<br />
1<br />
10<br />
DIF<br />
DIF<br />
AT<br />
Power ON<br />
AT: Setting the soldering time<br />
0.5<br />
RX-80HRT-3BC<br />
RX-80HRT-3.2D<br />
2 3<br />
■Replacement Tip with Integrated Heater<br />
34.5<br />
9<br />
60˚<br />
4<br />
5.4<br />
1<br />
45˚<br />
Tip temperature<br />
RX-80HRT-0.5C<br />
When using together with sleep function<br />
Tip temperature<br />
Set<br />
temperature<br />
Time<br />
12<br />
6<br />
Operation<br />
Power ON<br />
Operation<br />
Power ON<br />
1<br />
94<br />
RX-80HRT-B<br />
60˚<br />
RX-80HRT-4C<br />
RX-80HRT-5.4D<br />
(1) Soldering time countdown<br />
(AT) is started when the tip<br />
temperature goes outside DIF<br />
after the tip has been applied<br />
to the component.<br />
(2) The alarm sounds after the<br />
preset countdown time ends.<br />
(The display will flash twice)<br />
(3) Operator removes the tip from<br />
the component.<br />
Key Lock function (PAT.)<br />
Tamper-proof keypad lock using a password. Not tools or cards<br />
necessary.<br />
Calibration function (PAT.)<br />
The calibration function digitally offsets the difference between the<br />
tip temperature and the temperature shown by a tip thermometer<br />
being used.<br />
10<br />
RX-80HRT-1C<br />
4.7<br />
DIF<br />
DIF<br />
CT<br />
SUT<br />
DIF<br />
DIF<br />
1.2<br />
8.5<br />
45˚<br />
1<br />
8<br />
45˚<br />
RX-80HRT-4.7C<br />
3<br />
SUT<br />
10.5<br />
45˚<br />
Set temperature<br />
Power OFF<br />
RX-80HRT-3K<br />
Time<br />
Set temperature<br />
Sleep<br />
setting temp.<br />
Power OFF<br />
Time<br />
RX-80HRT-1BC<br />
Model<br />
RX-802AS<br />
Voltage<br />
110V,120V,130V,220V,230V,240V AC 50/60Hz<br />
Power Consumption<br />
80W<br />
Soldering Unit Voltage<br />
/Consumption<br />
24V AC/72W<br />
Temperature Setting Range<br />
50–450°C<br />
Dimensions<br />
Soldering Unit 158mm ( w/o cord bushing )<br />
Control Unit 146(L) 5 115(W) 5 98(H)mm<br />
Weight<br />
Soldering Unit Approx. 28g ( w/o cord )<br />
Control Unit Approx. 1.8kg ( w/o cord )<br />
Leak Voltage<br />
Less than 2mV<br />
Ground Resistance<br />
Less than 2Ω<br />
Control Unit to Soldering<br />
Unit Cord Length<br />
1.2m<br />
Power Cord Length<br />
1.2m (3 core cord) ground plug<br />
Accessory<br />
Soldering Iron Stand (ST-20)<br />
Equivalent to IPC/EIA J-STD-001C<br />
■Replacement Parts<br />
RX-802AS Soldering Unit<br />
RX-80GAS<br />
The RX-80HRT-2CD and RX-80HRT-3CD cannot be sold or used in the U.S. Therefore, please do not take them to or use them in the U.S.<br />
0.8<br />
4.5<br />
1.2<br />
R0.15<br />
0.4<br />
2<br />
New ergonomic design soldering unit (PAT.)<br />
New ergonomically designed soldering unit provides comfortable<br />
usability, easy handling and a shorter distance from grip to tip.<br />
Reliable traceability<br />
We can provide periodic calibration of the unit if required and<br />
issue certification necessary for various purposes.<br />
9<br />
RX-80HRT-SB<br />
45˚<br />
11.5<br />
RX-80HRT-2C<br />
8.5 10<br />
13<br />
11.5<br />
10 10<br />
10<br />
RX-80HRT-0.8D<br />
10.5<br />
45˚<br />
How to Change the Soldering Unit Tip<br />
To remove the soldering unit tip, slide the lever in the direction of<br />
the arrow. The tip will then protrude from the handpiece and can be<br />
removed easily by holding and pulling the plastic housing of the integrated<br />
tip/heater.<br />
Tip<br />
RX-80HRT-4.5K<br />
1.2<br />
1.2<br />
4.7<br />
R0.3<br />
φ2<br />
2<br />
0.4<br />
2<br />
Hold here to remove<br />
Four colors to differentiate<br />
between stations, tasks or types<br />
of solder being used.<br />
(gray) RX-80RB<br />
(black) RX-80RB-BK<br />
(orange) RX-80RB-OR<br />
(green) RX-80RB-GR<br />
Standard<br />
RX-80HRT-B<br />
45˚<br />
11.5<br />
RX-80HRT-2CD<br />
RX-80HRT-1.2D<br />
10.5<br />
45˚<br />
RX-80HRT-4.5KH<br />
3<br />
R0.6<br />
1.6<br />
0.5<br />
RX-80HRT-2B<br />
45˚<br />
RX-80HRT-3C<br />
RX-80HRT-1.6D<br />
76˚<br />
5.5<br />
2.5<br />
ST-20 Replacement sponge<br />
ST-53SP<br />
10<br />
45˚<br />
RX-80HRT-5.5K<br />
2<br />
R0.3<br />
Slide lever<br />
Handpiece grip rubber (Anti-static)<br />
Note : Cannot be used with RX-802ASPH<br />
See P70 for more information about tip shapes and dimensions.<br />
3<br />
3<br />
30˚<br />
2.4<br />
0.5<br />
RX-80HRT-LB<br />
11.5<br />
45˚<br />
RX-80HRT-3CD<br />
10<br />
RX-80HRT-2.4D<br />
12<br />
RX-80HRT-LBJ<br />
SMT LEAD-FREE TEMPERATURE<br />
CONTROLLED<br />
CERAMIC<br />
HEATER<br />
NICHROME<br />
HEATER<br />
SPECIAL<br />
PURPOSE<br />
SOLDER POT DESOLDERING SOLDERING<br />
ACCESSORIES<br />
HEATED TOOLS HAND TOOLS<br />
TOOL SETS<br />
21