Vol.45 - Protel

Low Lint Non-Slip Gloves
WG Series
These woolly nylon
gloves offer non-slip protection.
Seamless with high elasticity for a perfect fit. Perfect for holding
small components by the fingertips. Also available with
polyurethane resin coating on only the palm or the fingertip
areas for improved ventilation. Machine washable.
WG-1 Series
A
B
WG-2 Series
A
Polyurethane
Finger Tip Coating
MODEL Item Size A 5 B
WG-1S Low Lint S
65×185mm
WG-1M Non-Slip M 65×205mm
WG-1L Gloves L 65×225mm
Palm Coating
MODEL Item Size A 5 B
WG-2S Low Lint S
65 5 185mm
WG-2M Non-Slip M 65 5 205mm
WG-2L Gloves L 65 5 225mm
Anti-Static Gloves WG-3/4 Series
Designed to prevent static build up
Finger Tip Coating
MODEL Item Size A 5 B
WG-3S
S
65×185mm
Anti-Static
WG-3M M 65×205mm
Gloves
WG-3L L 65×225mm
Palm Coating
MODEL Item Size A 5 B
WG-4S
S
65 5 185mm
Anti-Static
WG-4M M 65 5 205mm
Gloves
WG-4L L 65 5 225mm
B
They are made from wooly nylon with conductive fiber to
remove static build up. Polyurethane resin coating on only
the palm or the fingertip areas assures improved ventilation.
Surface resistrance : 3.3 5 10 8 Ω
WG-3 Series
A
B
WG-4 Series
A
B
Polyurethane
ANTI STATIC
WG-3/4 series
RoHS
Note : The Polyurethane resin coating
is not an anti-static metarial.
Surface Resistivity Meter
WA-400
Color LED measurement display
Measures the Surface Resistivity (in Ω/Sq), Resistance to Ground (RTG)
and Resistance between two points (RTT), of flooring, work surfaces,
conductive materials, and anti-static accessories. Powered by 9V battery
(006P), and compact in size. Measurements instantly displayed in three
color LED.
两
RTT
点 间
Testing
电 阻 测 定 接 口
两 Test 点 间 leads 电 阻 测 are 定 。( included 请 使 用 标 准 for 配 件 measuring
地 线
) 使 用 时 , 表 面 电 阻 测 定 功 能 无 效 。
Resistance between two points.
When measuring RTT the Surface
Resistivity electrodes on the rear of
the test unit become inactive.
Range
Classification LED Display
Less than 10 5 Ω(Ω/sq) Conductive Green
Between 10 6 and〜10 11 Ω(Ωsq) Dispassive Orange
More than 10 12 Ω(Ωsq)) Insulative Red
RTG
Testing
Using one of the
two test leads,
connect the
接 地 电 阻 测 定
meter to a lead,
用 the 接 lead 口 to
背 ground. 面 表 面 电 This 阻 测 定 端 子
与 measures 该 接 地 线 间 的 电 阻 测
定 。( 请 使 用 标 准 配 件 地
Resistance
线 )
between the
electrodes on
the rear of the
test unit and the
ground point.
Parallel
Resistivity
Electrodes
Surface Resistivity
Testing:
Place the tester on
表 面 电 阻 测 定
the material surface
and push 端 the 子 button
until the 表 面 电 阻 测 定
measurement 将 电 阻 测 is 定 计 置 于 被
displayed.
测 定 物 之 上 。
接 地 电 阻 测 定
RTG Testing:
表 面 接 地 电 阻 测 定 端
Measures 子 与 Resistance
表 面 电 阻 测 定 端
between 子 the 间 的 电 阻 测 定 。
electrodes and
ground point.
MODEL
WA-400
Item
Surface Resistivity Meter
Power Supply
9V (006P) Battery
Ranges
10 3 –10 12 Ω/sq (Surface Resistivity)
10 3 –10 12 Ω(RTG & RTT)
Tolerance ±10%
Battery Life
Approx. 40 hours
Dimensions
615 265 96 mm
Weight
70g (w/o battery)
Accessories
2 5 Test Wires
Wrist strap and footwear tester
WA-8
Check your personnel static control straps & footwear
Powered by 9V battery (006P), and compact in size. As simple as pushing
a button! Results are immediate and easy to understand. A PASS is indicated
when the LED lights and a buzzer sounds. With LO-FAIL or HI-FAIL
the buzzer will not sound.
MODEL
Item
Power Supply
Measurement
Display
WA-8
Battery Life
Dimensions
Weight
■Options
Test Wires (3m)
WA-8GW
discontinued
Footwear
Wrist Strap
WA-8GW
Compact and
Portable
Compact and
Portable
WA-8FP
WA-8
Wrist Strap and Footwear Tester
9V (006P) Battery
PASS: 10 5 –10 9
LO-FAIL Less than 10 5
Hi-FAIL More than 10 9
PASS: 800kΩ to 9MΩ
LO-FAIL Less than 800kΩ
Hi-FAIL More than 9MΩ
Approx. 40 Hours
61 5 26 5 96 mm
70g (without battery)
Foot Plate (340 5 180mm)
WA-8FP
SMT LEAD-FREE TEMPERATURE
CONTROLLED
CERAMIC
HEATER
NICHROME
HEATER
SPECIAL
PURPOSE
SOLDER POT DESOLDERING SOLDERING HEATED TOOLS HAND TOOLS
ACCESSORIES
TOOL SETS
55