Vol.45 - Protel
Vol.45 - Protel
Vol.45 - Protel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2 soldering irons can be used<br />
Can be prepared with 2 different tip types. Allows different types of<br />
work [such as Micro soldering /High power work (150W)] at the same<br />
time.<br />
The 2 soldering irons allow different temperature settings.<br />
Independent displays make setting-check easy.<br />
Enables the reworking of chip parts.<br />
Allows you to rework chip parts using 2 tips at a time. Occasional<br />
rework may be available without other special tools.<br />
Advanced high functionality<br />
Equipped with intelligent functions such as Sleep function, Sleep function<br />
release, Shutdown function and Key lock function based on the<br />
RX-802AS.<br />
Easy–to–use handpiece<br />
Equipped with a favorable RX-80GAS/85GAS handpiece. Easy to<br />
replace tip without using tools even though a tip is hot. Lighter;<br />
reduced heat-up of grip; flexible soldering unit cord; and a shorter distance<br />
from the handpiece to the tip. Good for more hours of work.<br />
Wide variety of tips<br />
More than 40 shapes of tip are available. Choose suitable tip for your<br />
operation.<br />
How to Change the Soldering Unit Tip<br />
To remove the soldering unit tip, slide the lever in the direction of the arrow.<br />
The tip will then protrude from the handpiece and can be removed easily by<br />
holding and pulling the plastic housing of the integrated tip/heater.<br />
Slide lever<br />
SMT LEAD-FREE<br />
TEMPERATURE<br />
CONTROLLED<br />
CERAMIC<br />
HEATER<br />
NICHROME<br />
HEATER<br />
Tip<br />
Hold here to remove<br />
MODEL<br />
RX-822AS<br />
Voltage<br />
110-120, 220-240V AC<br />
Power Consumption 220–260W<br />
RX-85GAS: Soldering unit [1] side 24V AC 72W/ 150W<br />
Soldering Iron Voltage /Wattage<br />
RX-80GAS: Soldering unit [2] side 24V AC 72W<br />
Temperature Setting Range 50–450°C (122–842°F)<br />
Control Unit : 194(L) X 116(W) X 105(H)mm<br />
RX-85GAS<br />
Dimensions<br />
174mm (with RX-85HRT-5D, w/o cord bushing)<br />
RX-80GAS<br />
158mm (with RX-80HRT-B, w/o cord bushing)<br />
Control Unit :Approx. 4.9kg (w/o cord)<br />
RX-85GAS<br />
Weight<br />
Approx.39g (with RX-85HRT-5D, w/o cord bushing)<br />
RX-80GAS<br />
Approx. 28g (with RX-80HRT-B, w/o cord bushing)<br />
Soldering Unit Cord Length RX-85GAS : 1.5m, RX-80GAS : 1.2m<br />
AC Power Cord Length 1.5m 3 core cord (ground plug)<br />
Leak Voltage<br />
Less than 2mV<br />
Ground Resistance Less than 2Ω<br />
Accessories Soldering Iron Stand (ST-20) X 2<br />
■Replacement Parts<br />
RX-852AS Soldering Unit<br />
RX-85GAS (Tip not included)<br />
RX-802AS Soldering Unit<br />
RX-80GAS (Tip not included)<br />
ST-20 Replacement Sponge<br />
ST-53SP<br />
Tip Holder (Option)<br />
ST-20C<br />
Flux Guard Rubber (Option)<br />
RX-80P<br />
ST-20C soldering iron stand with option /ST-20C (tip holder).<br />
Handpiece grip rubber (Anti-static)<br />
Four colours to differentiate<br />
between stations, tasks or types<br />
of solder being used.<br />
(gray) RX-80RB<br />
(black) RX-80RB-BK<br />
(orange) RX-80RB-OR<br />
(green) RX-80RB-GR<br />
RX-80P<br />
Equivalent to IPC/EIA J-STD-001C<br />
ST-20C<br />
SPECIAL<br />
PURPOSE<br />
SOLDER POT DESOLDERING SOLDERING<br />
ACCESSORIES<br />
HEATED TOOLS HAND TOOLS<br />
TOOL SETS<br />
25
Change language