Vol.45 - Protel
Vol.45 - Protel
Vol.45 - Protel
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3<br />
■Optional Tips (integrated sensor/heater/nozzle)<br />
Ø 6.4<br />
RX-80HRT-PHB<br />
9<br />
R 0.15<br />
R 0.3<br />
1<br />
8.5<br />
8<br />
45°<br />
11.5<br />
45°<br />
411.5<br />
1.2<br />
45°<br />
10<br />
RX-80HRT-PHSB<br />
RX-80HRT-PH1BC<br />
34<br />
RX-80HRT-PH4C<br />
0.5<br />
4.7<br />
R 0.3<br />
3<br />
8.5<br />
9<br />
60°<br />
211.5<br />
7<br />
1.6<br />
45°<br />
45°<br />
MODEL<br />
RX-802AS PH<br />
Voltage<br />
110V,120V,220V,230V,240V AC 50/60Hz<br />
Power Consumption<br />
80W<br />
Soldering Unit Voltage/Consumption<br />
24V 72W<br />
Temperature Setting Range<br />
50—450˚C<br />
Insulation Resistance (500V DC)<br />
Over 100MΩ<br />
Dimensions<br />
Soldering Unit 全 长 158mm ( w/o cord bushing )<br />
Control Unit 146(L) 5 115(W) 5 98(H) (mm)<br />
Weight<br />
Soldering Unit<br />
33g (w/o cord)<br />
Control Unit<br />
1.8kg(w/o cord)<br />
Leak Voltage<br />
Less than 2mV<br />
Ground Resistance<br />
Less than 2Ω<br />
Control Unit to Soldering Unit Cord Length 1.2m<br />
Gas Supply Pressure 0.2MPa(2kgf/cm 2 )<br />
Power Cord Length<br />
1.2m (3 core cord) ground plug<br />
Accessory<br />
Soldering Iron Stand, Tip Stand, Tip changing tool<br />
94<br />
RX-80HRT-PHB<br />
RX-80HRT-PH0.5C<br />
RX-80HRT-PH4.7C<br />
0.4 RX-80HRT-PH1.2D 0.5 RX-80HRT-PH1.6D 0.5<br />
3.2<br />
4.5<br />
1.2<br />
0.5<br />
RX-80HRT-PHBM<br />
RX-80HRT-PH3C<br />
10<br />
RX-80HRT-PH3.2D<br />
10.5<br />
45°<br />
RX-80HRT-PH4.5K<br />
5.4<br />
10<br />
7<br />
2<br />
1<br />
3<br />
0.8<br />
2.4<br />
3<br />
1 1.2<br />
RX-80HRT-PH5.4D<br />
4.7<br />
2<br />
11.5<br />
45°<br />
10.5<br />
RX-80HRT-PH2C<br />
RX-80HRT-PH3CD<br />
45°<br />
RX-80HRT-PH4.5KH<br />
■Replacement Parts<br />
N2 O-ring ST-20 Replacement sponge<br />
RX-80PHP ST-53SP<br />
Tip changing tool<br />
RX-80PHC<br />
ST-20C tip holder is<br />
mounted on the ST-20<br />
soldering iron stand<br />
30°<br />
RX-80PHC<br />
R0.25<br />
11.5<br />
45°<br />
0.4<br />
10<br />
9<br />
60°<br />
45°<br />
13<br />
10<br />
10<br />
13<br />
10.5<br />
RX-80HRT-PHLB<br />
RX-80HRT-PH1C<br />
RX-80HRT-PH2CD<br />
RX-80HRT-PH3BC<br />
RX-80HRT-PH0.8D<br />
RX-80HRT-PH2.4D<br />
45°<br />
RX-80HRT-PH3K<br />
RX-80HRT-PHLBJ<br />
Tip Stand<br />
ST-20C<br />
Soldering Unit Hand Piece<br />
RX-80GASPH<br />
RX-80PHP<br />
RX-802ASPH Handpiece Set (RX-80GASPHSET)<br />
To upgrade a standard RX-802AS station to Nitrogen<br />
applicable station :RX-802ASPH<br />
Equivalent to IPC/EIA J-STD-001C<br />
N2 Station<br />
NC-100R<br />
A compact station comprising Nitrogen generator and controller<br />
all in one. The built-in regulator maintains a stable<br />
output pressure (0.15MPa). The<br />
RX-802ASPH or RX-711ASPH<br />
can be stacked on top for<br />
the most efficient and<br />
space-saving solution.<br />
Nitrogen separation mechanism<br />
The special separation<br />
membrane separates the<br />
Nitrogen from the compressed<br />
air produced by a<br />
compressor.<br />
(According to in-house<br />
measurement methods)<br />
Compressed air without<br />
pressure regulation<br />
or cleansing functions<br />
also requires the use of<br />
the following filters.<br />
The relation between Nitrogen density,<br />
flow rate and input air pressure.<br />
100<br />
Nitrogen density [%]<br />
95<br />
90<br />
85<br />
80<br />
0.3[MPa]<br />
0.5[MPa]<br />
0.7[MPa]<br />
75<br />
0.5 1 1.5 2.0 2.5 3.0 3.5 4.0<br />
Flow rate [L/ min]<br />
MPa<br />
L/min<br />
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0<br />
0.3 98.7 96.6 94.5 92.0 90.8 89.7 88.5 87.5<br />
0.5 99.8 99.2 98.0 96.8 95.7 94.8 93.8 92.6<br />
0.7 99.9 99.7 99.2 98.3 97.7 97.1 96.3 95.4<br />
A example of measured value<br />
Filter setup example<br />
Dust<br />
Oil mist<br />
Mist<br />
Separation<br />
membrane<br />
(Tube shape)<br />
Pressure level<br />
Unregulated air<br />
Filter out<br />
Nitrogen generation density<br />
Nitrogen gas generation and control<br />
RoHS<br />
Air Filter Mist Filter Regulator<br />
Removes dust<br />
and mist<br />
above 0.3μ<br />
Nitrogen<br />
Applicable<br />
Filter out<br />
Filter out<br />
Removes dust<br />
and mist<br />
above 0.01μ<br />
LEAD<br />
FREE<br />
Filter out<br />
ANTI<br />
STATIC<br />
Nitrogen<br />
Oxygen<br />
Cleansed<br />
and stabilized air<br />
Reduces and<br />
stabilizes pressure<br />
(under 0.7MPa)<br />
MODEL<br />
NC-100R<br />
Applicable gas<br />
Air<br />
Input pressure<br />
0.3-0.7MPa<br />
Input temperature<br />
5—50˚C<br />
Nitrogen generation density Maximum 99.5% (0.7MPa, 0.5L/min)<br />
Reccomended Nitrogen generation flow rate 1.0Lpm (0.7MPa, 99.7%)<br />
Maximum usage temperature 60°C<br />
Flow meter<br />
0.5-4.0L/min<br />
Dimensions (not including protruding parts) 185(L)×118(W)× 112(H)mm<br />
Weight<br />
2Kg<br />
Required Hose Dimension<br />
Input Outer diameter 6mm<br />
Output Outer diameter 4mm<br />
SMT LEAD-FREE TEMPERATURE<br />
CONTROLLED<br />
CERAMIC<br />
HEATER<br />
NICHROME<br />
HEATER<br />
SPECIAL<br />
PURPOSE<br />
SOLDER POT DESOLDERING SOLDERING<br />
ACCESSORIES<br />
HEATED TOOLS HAND TOOLS<br />
TOOL SETS<br />
23
Change language