Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
System Operation<br />
1. Connect tubing to the controller by pushing<br />
the black connector firmly into the output<br />
socket on the rear panel of the controller. To<br />
disconnect, pull the connector from the socket.<br />
2. Power on the controller by pressing the black<br />
power switch located on the front lower right<br />
of the controller.<br />
Note: The controller will initiate a brief<br />
self-test followed by a 5 second countdown<br />
shown on the LCD display.<br />
3. Press the run/stop buttons on the<br />
top panel to activate each channel<br />
being used. (left, right, or both)<br />
4. Check that the impulse is felt directly<br />
under the arch of the foot. If not, adjust<br />
the ImPad foot cover accordingly.<br />
5. Check regularly for patient comfort, tenderness<br />
and skin integrity per hospital protocol.<br />
6. For optimum results, make sure patient is seated<br />
head up, feet down (reverse trendelenberg position).