08.03.2014 Views

One luminaire, lots of lighting ideas

One luminaire, lots of lighting ideas

One luminaire, lots of lighting ideas

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ON-OFF<br />

Fastweb - Milan, Italy<br />

TAB.3<br />

ON-OFF 57/87 with dulled plate at LV1<br />

code version lamp ballast options optics emission kg<br />

T D 1E screen<br />

structural module 1900039AE<br />

<strong>lighting</strong> module T19SD001AE 1x14W T5 G5 EL A2 • Dulled plate direct 2.1<br />

structural module 1900039AE<br />

<strong>lighting</strong> module T19SD002AE 1x24W T5 G5 EL A2 • Dulled plate direct 2.1<br />

structural module 1900037AE<br />

<strong>lighting</strong> module T19SD003AE 1x21W T5 G5 EL A2 • Dulled plate direct 2.5<br />

structural module 1900037AE<br />

<strong>lighting</strong> module T19SD004AE 1x39W T5 G5 EL A2 • Dulled plate direct 2.5<br />

structural module 1900028AE<br />

<strong>lighting</strong> module T19SD005AE 1x28W T5 G5 EL A2 • • Dulled plate direct 2.9<br />

structural module 1900028AE<br />

<strong>lighting</strong> module T19SD006AE 1x54W T5 G5 EL A2 • • Dulled plate direct 2.9<br />

structural module 1900035AE<br />

<strong>lighting</strong> module T19SD007AE 1x35W T5 G5 EL A2 • • Dulled plate direct 3.3<br />

structural module 1900035AE<br />

<strong>lighting</strong> module T19SD008AE 1x49W T5 G5 EL A2 • • Dulled plate direct 3.3<br />

Housing<br />

Composite structure made <strong>of</strong> extruded aluminium and laser-shaped<br />

matching steel parts. Surface treated and painted white RAL 9003<br />

using polymerised powder paints.<br />

Screens available<br />

Dulled plate made <strong>of</strong> smooth dulled plastic material featuring good<br />

resistance to shocks and weather conditions, high transparency and<br />

brightness. It is installed by simply resting it in place with approximately<br />

1 cm <strong>of</strong>fset. Optimum light diffusion and mitigation <strong>of</strong> direct<br />

glare. Supplied complete with finishing border strips.<br />

Electrical harness<br />

Electrical harness wired for 230V-50Hz power supply. 2.5 mm 2 LTN<br />

terminal block. 0.75 mm 2 H05V2-U heat-resistant stiff cable. Power<br />

factor improvement cosϕ>0.95. Dimmable electronic ballast upon<br />

request. Single ignition. Electric protection Class I. Complying with<br />

harmonised standards for <strong>luminaire</strong>s EN 60598-1 (general provisions<br />

and testing) and EN 60598-2-22 (<strong>luminaire</strong>s with emergency<br />

function).<br />

F<br />

structural module 1900035AE<br />

<strong>lighting</strong> module T19SD009AE 1x80W T5 G5 EL A2 • • Dulled plate direct 3.3<br />

Options: T=electronic ballast - D=dimmable electronic ballast - 1E=1hr emergency.<br />

ORDERING GUIDE: each product consists <strong>of</strong> two parts, namely the structural module and the <strong>lighting</strong> module. These two parts are identified<br />

by different codes to be delivered at different times, if required. This allows the person responsible for the plasterboard to have the rail<br />

structure available and set it in during plasterboard construction, or at a early phase in any case. The <strong>lighting</strong> module is usually assembled<br />

by the electrician after finishing, skimming and painting <strong>of</strong> the plasterboard.<br />

Both codes should be detailed upon ordering (ex 1900040AE and T19LD010AE) together with the respective delivery dates.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!