One luminaire, lots of lighting ideas

ON-OFF
code version lamp ballast options optics emission kg
T D 1E screen
TAB. 5
ON-OFF 57/130 with translucent diffuser box at LV0
structural module 1900039AE
lighting module T19DD001AE 6x10W HSG G4 Transl. diffuser box direct 2.3
structural module 1900037AE
lighting module T19DD002AE 10x10W HSG G4 Transl. diffuser box direct 3.3
structural module 1900028AE
lighting module T19DD003AE 12x10W HSG G4 Transl. diffuser box direct 4.3
structural module 1900035AE
lighting module T19DD004AE 16x10W HSG G4 Transl. diffuser box direct 5.3
Options: T=electronic ballast - D=dimmable electronic ballast - 1E=1hr emergency.
ORDERING GUIDE: each product consists of two parts, namely the structural module and the lighting module. These two parts are identified
by different codes to be delivered at different times, if required. This allows the person responsible for the plasterboard to have the rail
structure available and set it in during plasterboard construction, or at a early phase in any case. The lighting module is usually assembled
by the electrician after finishing, skimming and painting of the plasterboard.
Both codes should be detailed upon ordering (ex 1900040AE and T19LD010AE) together with the respective delivery dates.
Housing
Composite structure made of extruded aluminium and laser-shaped
matching steel parts. Surface treated and painted white RAL 9003
using polymerised powder paints.
Screens available
Translucent diffuser box made of 0.75 mm thick translucent polycarbonate
folded at the four sides. Good light diffusion and mitigation
of luminance and direct glare. Overcentre retention.
Electrical harness
Electrical harness wired for 230V-50Hz power supply. 2.5 mm 2 LTN
terminal block. Single-pole cable with flexible lead into an insulating
silicon rubber sheath, with high thermal resistance and flame-retardant
characteristics. Electronic transformer. Noise filter. Electric protection
Class I. Complying with harmonised standards for luminaires
EN 60598-1.
F