One luminaire, lots of lighting ideas
One luminaire, lots of lighting ideas
One luminaire, lots of lighting ideas
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ON-OFF<br />
code version lamp ballast options optics emission kg<br />
T D 1E screen<br />
TAB. 15<br />
ON-OFF 97/130 with dichroic spotlights and no diffuser<br />
structural module 1900040AE<br />
<strong>lighting</strong> module T190D060AE 3x10W HRGS GU4 – direct 4.8<br />
structural module 1900030AE<br />
<strong>lighting</strong> module T190D061AE 4x10W HRGS GU4 – direct 5.8<br />
structural module 1900041AE<br />
<strong>lighting</strong> module T190D062AE 5x10W HRGS GU4 – direct 6.8<br />
structural module 1900016AE<br />
<strong>lighting</strong> module T190D063AE 7x10W HRGS GU4 – direct 7.8<br />
structural module 1900040AE<br />
<strong>lighting</strong> module T190D064AE 3x20W HRGS GU4 – direct 4.8<br />
structural module 1900030AE<br />
<strong>lighting</strong> module T190D065AE 4x20W HRGS GU4 – direct 5.8<br />
Housing<br />
Composite structure made <strong>of</strong> extruded aluminium and laser-shaped<br />
matching steel parts. Surface treated and painted white RAL 9003<br />
using polymerised powder paints.<br />
Dichroic spotlights<br />
0.6 mm thick steel plate structure shaped with panels on the four<br />
sides, surface treated and painted white RAL 9003 using powder<br />
paints. Ready to accommodate very low voltage swivelling dichroic<br />
spotlights.<br />
Electrical harness<br />
Electrical harness wired for 230V-50Hz power supply. 2.5 mm 2 LTN<br />
terminal block. Single-pole cable with flexible lead into an insulating<br />
silicon rubber sheath, with high thermal resistance and flame-retardant<br />
characteristics. Electronic transformer. Noise filter. Electric protection<br />
Class I. Complying with harmonised standards for <strong>luminaire</strong>s<br />
EN 60598-1.<br />
F<br />
structural module 1900041AE<br />
<strong>lighting</strong> module T190D066AE 5x20W HRGS GU4 – direct 6.8<br />
structural module 1900016AE<br />
<strong>lighting</strong> module T190D067AE 7x20W HRGS GU4 – direct 7.8<br />
Options: T=electronic ballast - D=dimmable electronic ballast - 1E=1hr emergency.<br />
ORDERING GUIDE: each product consists <strong>of</strong> two parts, namely the structural module and the <strong>lighting</strong> module. These two parts are identified<br />
by different codes to be delivered at different times, if required. This allows the person responsible for the plasterboard to have the rail<br />
structure available and set it in during plasterboard construction, or at a early phase in any case. The <strong>lighting</strong> module is usually assembled<br />
by the electrician after finishing, skimming and painting <strong>of</strong> the plasterboard.<br />
Both codes should be detailed upon ordering (ex 1900040AE and T19LD010AE) together with the respective delivery dates.
Change language