08.03.2014 Views

One luminaire, lots of lighting ideas

One luminaire, lots of lighting ideas

One luminaire, lots of lighting ideas

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ON-OFF<br />

TAB. 11<br />

ON-OFF 97/130 with dulled plate at LV2<br />

code version lamp ballast options optics emission kg<br />

T D 1E screen<br />

structural module 1900040AE<br />

<strong>lighting</strong> module T19SD028AE 1x14W T5 G5 EL A2 • Dulled plate direct 3.6<br />

structural module 1900040AE<br />

<strong>lighting</strong> module T19SD029AE 1x24W T5 G5 EL A2 • Dulled plate direct 3.6<br />

structural module 1900030AE<br />

<strong>lighting</strong> module T19SD030AE 1x21W T5 G5 EL A2 • • Dulled plate direct 4.0<br />

structural module 1900030AE<br />

<strong>lighting</strong> module T19SD031AE 1x39W T5 G5 EL A2 • • Dulled plate direct 4.0<br />

structural module 1900041AE<br />

<strong>lighting</strong> module T19SD032AE 1x28W T5 G5 EL A2 • • Dulled plate direct 4.4<br />

structural module 1900041AE<br />

<strong>lighting</strong> module T19SD033AE 1x54W T5 G5 EL A2 • • Dulled plate direct 4.4<br />

structural module 1900016AE<br />

<strong>lighting</strong> module T19SD034AE 1x35W T5 G5 EL A2 • • Dulled plate direct 4.8<br />

structural module 1900016AE<br />

<strong>lighting</strong> module T19SD035AE 1x49W T5 G5 EL A2 • • Dulled plate direct 4.8<br />

Housing<br />

Composite structure made <strong>of</strong> extruded aluminium and laser-shaped<br />

matching steel parts. Surface treated and painted white RAL 9003<br />

using polymerised powder paints.<br />

Screens available<br />

Dulled plate made <strong>of</strong> smooth dulled plastic material featuring good<br />

resistance to shocks and weather conditions, high transparency and<br />

brightness. It is installed by simply resting it in place with approximately<br />

1 cm <strong>of</strong>fset. Optimum light diffusion and mitigation <strong>of</strong> direct<br />

glare. Supplied complete with finishing border strips.<br />

Electrical harness<br />

Electrical harness wired for 230V-50Hz power supply. 2.5 mm 2 LTN<br />

terminal block. 0.75 mm 2 H05V2-U heat-resistant stiff cable. Power<br />

factor improvement cosϕ>0.95. Dimmable electronic ballast upon<br />

request (standard on the RGB versions). Single ignition. Electric<br />

protection Class I. Complying with harmonised standards for <strong>luminaire</strong>s<br />

EN 60598-1 (general provisions and testing) and EN 60598-<br />

2-22 (<strong>luminaire</strong>s with emergency function).<br />

F<br />

structural module 1900016AE<br />

<strong>lighting</strong> module T19SD036AE 1x80W T5 G5 EL A2 • • Dulled plate direct 4.8<br />

Options: T=electronic ballast - D=dimmable electronic ballast - 1E=1hr emergency.<br />

ORDERING GUIDE: each product consists <strong>of</strong> two parts, namely the structural module and the <strong>lighting</strong> module. These two parts are identified<br />

by different codes to be delivered at different times, if required. This allows the person responsible for the plasterboard to have the rail<br />

structure available and set it in during plasterboard construction, or at a early phase in any case. The <strong>lighting</strong> module is usually assembled<br />

by the electrician after finishing, skimming and painting <strong>of</strong> the plasterboard.<br />

Both codes should be detailed upon ordering (ex 1900040AE and T19LD010AE) together with the respective delivery dates.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!