One luminaire, lots of lighting ideas
One luminaire, lots of lighting ideas
One luminaire, lots of lighting ideas
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ON-OFF<br />
code version lamp ballast options optics emission kg<br />
T D 1E screen<br />
TAB. 13<br />
ON-OFF 97/130 with halogen lamps and translucent diffuser box at LV0<br />
structural module 1900040AE<br />
<strong>lighting</strong> module T19DD005AE 6x10W HSG G4 Transl. diffuser box direct 3.3<br />
structural module 1900030AE<br />
<strong>lighting</strong> module T19DD006AE 10x10W HSG G4 Transl. diffuser box direct 4.3<br />
structural module 1900041AE<br />
<strong>lighting</strong> module T19DD007AE 12x10W HSG G4 Transl. diffuser box direct 5.3<br />
structural module 1900016AE<br />
<strong>lighting</strong> module T19DD008AE 16x10W HSG G4 Transl. diffuser box direct 6.3<br />
Options: T=electronic ballast - D=dimmable electronic ballast - 1E=1hr emergency.<br />
ORDERING GUIDE: each product consists <strong>of</strong> two parts, namely the structural module and the <strong>lighting</strong> module. These two parts are identified<br />
by different codes to be delivered at different times, if required. This allows the person responsible for the plasterboard to have the rail<br />
structure available and set it in during plasterboard construction, or at a early phase in any case. The <strong>lighting</strong> module is usually assembled<br />
by the electrician after finishing, skimming and painting <strong>of</strong> the plasterboard.<br />
Both codes should be detailed upon ordering (ex 1900040AE and T19LD010AE) together with the respective delivery dates.<br />
Housing<br />
Composite structure made <strong>of</strong> extruded aluminium and laser-shaped<br />
matching steel parts. Surface treated and painted white RAL 9003<br />
using polymerised powder paints.<br />
Screens available<br />
Translucent diffuser box made <strong>of</strong> 0.75 mm thick translucent polycarbonate<br />
folded at the four sides. Good light diffusion and mitigation<br />
<strong>of</strong> luminance and direct glare. Overcentre retention.<br />
Electrical harness<br />
Electrical harness wired for 230V-50Hz power supply. 2.5 mm 2 LTN<br />
terminal block. Single-pole cable with flexible lead into an insulating<br />
silicon rubber sheath, with high thermal resistance and flame-retardant<br />
characteristics. Electronic transformer. Noise filter. Electric protection<br />
Class I. Complying with harmonised standards for <strong>luminaire</strong>s<br />
EN 60598-1.<br />
F