6U VME 6023 Crate Series

ADC2530 High Precision Peak Sensing ADC
ADC2530 from HYTEC electronics is a 8 fold high precision 13-bit peak sensing ADC with
common master gate and individual gates. Very low non-linearity with sliding scale correction.
Designed for HPGe detectors, ADC2530 provides resolution and linearity as required in high
precision spectroscopy. List mode and self triggered histogramming mode are available.
ADC 2530 Features
8 fold high resolution 13-bit/8k peak sensing ADC, common and individual gate (20ns-
20µs)
High linearity: +/-2% differential, with sliding scale correction, +/- 0.025% integral
8V full input range, polarity and 1k / 50R input impedance jumper selectable
On board dual-ported SRAM. Supports list mode or histogramming (8Kx32 bit spectra)
Channels can be self triggered, with programmable upper and lower thresholds
3µs conversion time per channel, < 20µs conversion time for all eight channels
Four control connectors for Master Gate, Fast Clear, Busy, and Data Ready (LEMO)
Six indicator LED’s for DTACK, Busy, Gate, Interrupt, Power, and Armed (acquiring)
Standard configurations
Item
ADC2530-VME64
ADC2530-VME64x
Description
8-channel, 13bit VME peak-sensing ADC
8-channel, 13bit VME64x peak-sensing ADC
IP CARDS—Industry Packs
Industry Packs add to the flexibility of VME64x, these plug-in cards are based on an industry
standard format and are designed to have wide application. They are very compact, 1.8 inches
by 3.9 inches in size and they include an ID PROM which aids auto-configuration.
They have connectors that are keyed for ease of installation. A selection of Hytec IP cards is
shown below:
Standard configurations (other possible on request)
Model Name Description
8401.1 IP-ADC-8401 8-ch. 16bit ADC with transient recorder memory (+/-10V)
8401.2 IP-ADC-8401-L 8-ch. 16bit ADC with transient recorder memory (+/-5V)
8402.1 IP-DAC-8402 16-ch. 16bit DAC (+/-10V) O/P with function generator memory
8402.2 IP-DAC-8402-L 16-ch. 16bit DAC (+/-5V) O/P with function generator memory
8403.1 IP-MUXADC-8403.1 16-channel (mulitplexed) ADC 24bit resolution with 1MB RAM
8403.2 IP-MUXADC-8403.2 16-channel (mulitplexed) ADC 20bit resolution with 2MB RAM
8408 IP-ADC-8408 16-channel ADC 12bit resolution
8411 IP-ADC-8411 16-ch. (simultaneous) ADC 16bit resolution
8413 IP-ADC-8413 16-ch. (simultaneous) ADC 16bit resolution (One ADC per input)
8420 IP-ADC-8420 1-channel 500MHz Flash ADC 8bits
8505 IP-DIO-8505 16-channel Buffered Digital I/O Board
8506 IP-IP-IO-8506 48-bit Digital I/O Board
8512 IP-SCALER-8512 16-channel Scaler 32-bit 20MHz Industry Pack
8513 IP-ENCODER-8513 4-channel Quadrature Encoder Industry Pack
8515 IP-SI-8515 8-channel RS-232 UART Industry Pack
8516 IP-SI-8516 8-channel RS-485 UART Industry Pack
8601 IP-STEPPER-8601 4-ch Stepped Motor Controller Industry Pack
Motor Control (Stepper and DC Servo) & Power Drive Systems
Hytec’s Stepper Motor system consists of two main parts, a controller (Industry Pack 8601),
mounted on an IP carrier card (Hytec 8002,3 or 4, 6335) or inside our 9010 IOC unit. A SCSI-2
cable connects to a separate rackmounting enclosure housing the drive system (SMDS4 or MDS-
8) which is a separate 3U high rack mounting unit. The drive houses plug in cards and logic
cards. Support is available for 4 or 5 phase stepper motors (L/R or BIPOLAR drive) or DC Servo
motors. Phase current can be up to 4 amps and is programmed by switches on each chopped
drive card. We also have drive cards for three-phase and five-phase motors.
ADC2530 - VME64x Version
Terminal Board
Industry Pack (IP)
SMDS4 Bipolar Version
119