6U VME 6023 Crate Series
6U VME 6023 Crate Series
6U VME 6023 Crate Series
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical Details of WIENER <strong>VME</strong>/<strong>VME</strong>64x/VXI/VXS crates<br />
<strong>VME</strong> / <strong>VME</strong> 430 / <strong>VME</strong>64x / VXI Backplanes<br />
Features of all WIENER Multi-layer Backplanes:<br />
Strip line technology suitable for data rates of 320Mbyte/s (64bit)<br />
High power distribution by current multiplayer / bus bar system<br />
Excellent RF shielding<br />
Well dispersed filter-capacitors<br />
Minimized ground shift and cross talk<br />
Automatic daisy chain<br />
Plugged flat cable for sense and control<br />
Provision for up to 8 temperature sensors (module temp. checking)<br />
Sense circuit protection by PTC- resistors (Optionally)<br />
On board filter capacitors (electrolytic and ceramic) are widely distributed. Together with a prudent<br />
power layer design this provides the highest filter effect against power supply and signal noise.<br />
Ground shielding layer encircles all signal lines which results in low crosstalk. A large current busbar<br />
system prevents effective DC ground shift.<br />
5, 7, and 10 slot types can be mounted together as a common ground Multi-<strong>VME</strong>-bus system. It is<br />
then possible to operate separate busses within one <strong>VME</strong> crate. A diode blocks on board generated<br />
Sys- Reset signals against the other backplanes. External generated Sys- Reset reach all<br />
backplanes in parallel.<br />
3U <strong>VME</strong> J1 and <strong>VME</strong>64x J1 backplane<br />
10 layer actively terminated backplane with active automatic daisy chain and active termination. 3U<br />
high <strong>VME</strong> J1 with 96pin DIN connectors meets IEEE-1014-1987. <strong>VME</strong>64x (<strong>VME</strong> 64 Extension)<br />
versions are equipped with 5-row (160pin) connectors. Available with up to 21 slots.<br />
<strong>6U</strong> <strong>VME</strong>64 J1/J2 backplane<br />
Meets ANSI/VITA 1-1994 and IEEE-1014-1987. Extended power layers and special current rails<br />
permit high power distribution. The 21 slot monolithic <strong>VME</strong> backplane features more than 300A<br />
current capability for the 5V, 15A per slot (at 70°C) with 96 pin connectors. Available with 7, 9, 10<br />
or 21 slots. Optional the J2 can be equipped with 160pin 5-row connectors.<br />
<strong>6U</strong> <strong>VME</strong>430 J1/Jaux/J2 backplane (CERN spec.)<br />
Based on <strong>VME</strong> 64 with J1/J2 the same performance is given. Meets CERN spec. V430 entirely. Five<br />
row 160-pin connectors are optionally available. Available with 9 or 21 slots. Jaux features:<br />
Geographical address,<br />
bussed and terminated differential signals: clock, start/stop gate, and clear<br />
Clean earth,<br />
+/-15V (Optional)<br />
ECL voltages –2V and –5V<br />
<strong>6U</strong> <strong>VME</strong>64x J1/J0/J2 backplane<br />
<strong>VME</strong> 64x outfitted with 5-row 160 pin J1/J2. Optionally with 133 pin hard metric J0. W-Ie-Ne-R’s<br />
special current multilayer made of z-bended copper sheets, further stiffens the 4.8mm thick board.<br />
Active on board termination and active automatic daisy-chain (CBLT compatible!). Available with<br />
up to 21 slots.<br />
<strong>6U</strong> <strong>VME</strong>64xP J1/J0/J2 backplane<br />
<strong>VME</strong>64xP like 64x but 18 layers with some special defined pins, and higher current ratings<br />
according to IEEE and VIPA specifications. Available with 21 slots only. <strong>VME</strong>64xP is also known as<br />
64x Standard for Physics or VIPA- Standard<br />
<strong>6U</strong> <strong>VME</strong>64x J1/Jaux/J2 backplane<br />
Our 2 in 1 backplane, compatible to 64x (without J0) applications and V430 modules. Features all<br />
voltages of both standards and full Jaux pin out:<br />
<strong>VME</strong>64x: 3,3V, 5V, +/-12V, 48V and<br />
V430: -2V, -5,2V, +-15V (via Jaux).<br />
<strong>6U</strong> <strong>VME</strong>64 J1/J2 backplane with power distribution (P47)<br />
Meets ANSI/VITA 1-1994 and IEEE-1014-1987. Extended power layers and special current rails<br />
permit high power distribution.<br />
The 16 slot monolithic has two P47 power connectors for cPCI power supplies on both left and<br />
right side and a control slot for the WIENER CML (slot 17)<br />
<strong>VME</strong> J1<br />
<strong>VME</strong>64 J1/J2<br />
<strong>VME</strong> 430 J1/Jaux/J2 (CERN)<br />
<strong>VME</strong>64x J1/J0/J2 / <strong>VME</strong>64xP (VIPA)<br />
16 slot <strong>VME</strong> J1/J2 backplane<br />
61
Change language