1992-1996 Dodge Viper RT/10 - Paxton Superchargers
1992-1996 Dodge Viper RT/10 - Paxton Superchargers
1992-1996 Dodge Viper RT/10 - Paxton Superchargers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Section 5<br />
REPLACEMENT SHOCK TOWER SUPPO<strong>RT</strong> INSTALLATION<br />
5. REPLACEMENT SHOCK TOWER<br />
SUPPO<strong>RT</strong> INSTALLATION<br />
A. Install the supplied shock tower brace onto<br />
each shock tower with the chamfered corner<br />
pointing forward. Use the factory bolt and<br />
nut and the supplied bolt, nut and washer in<br />
the top two holes.<br />
B. Using a 13/32" bit, drill the forward-most<br />
hole in each shock tower using the installed<br />
parts as a template. (See Fig. 5-a.)<br />
C. Install the supplied M<strong>10</strong> x 25mm bolts<br />
through the drilled holes and tighten using<br />
the supplied nuts and washers. (See Fig.<br />
5-b.)<br />
FACTORY BOLT<br />
***NOTE***<br />
Bracket is slotted to provide supercharger pulley clearance<br />
on different vehicles.<br />
Fig. 5-a / Passenger’s side shock tower brace<br />
TWO SUPPLIED x<br />
25mm M<strong>10</strong> BOLTS,<br />
NUTS AND WASHERS<br />
Fig. 5-b / Driver’s side shock tower brace<br />
5-1<br />
P/N: 4809646<br />
©2006 <strong>Paxton</strong> Automotive<br />
All Rights Reserved, Intl. Copr. Secured<br />
17FEB06 v2.0 92-96<strong>Viper</strong>(4809646v2.0)