1992-1996 Dodge Viper RT/10 - Paxton Superchargers
1992-1996 Dodge Viper RT/10 - Paxton Superchargers
1992-1996 Dodge Viper RT/10 - Paxton Superchargers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
12. AUXILIARY FUEL PUMP ASSEMBLY INSTALLATION, cont’d.<br />
INSTALL AND TIGHTEN CLAMP USING<br />
STEPLESS CLAMP PLIERS (20 PLACES)<br />
FACTORY FLEXIBLE LINE<br />
TO INTAKE MANIFOLD<br />
FACTORY SUPPLY LINE FROM<br />
FUEL TANK<br />
SUPPLIED FUEL PUMP<br />
FITTINGS (4 PLACES)<br />
(VERIFY THAT THE<br />
COPPER WASHER IS<br />
INSTALLED AND THE<br />
FITTING IS TIGHT)<br />
CUT THE SUPPLIED EFI FUEL<br />
HOSE TO LENGTH (<strong>10</strong> PLACES)<br />
VENT<br />
HOSE (8")<br />
5/16"<br />
HOSE BARB<br />
TEE (4<br />
PLACES)<br />
SUPPLIED<br />
FUEL<br />
PUMPS<br />
MARK AND DRILL TWO HOLES<br />
INSTALL THE SUPPLIED CLAMPS AND<br />
SCREWS TO HOLD THE FUEL PUMPS<br />
RED WIRES WITH STRIPE (FROM<br />
IGNITION TIMING CONTROL BOX)<br />
5/32" HOSE (CONNECTED TO MANIFOLD PRESSURE)<br />
MARK AND DRILL TWO HOLES.<br />
INSTALL THE SUPPLIED SHEET METAL<br />
SCREWS TO HOLD THE FUEL CONTROL UNIT<br />
<strong>10</strong>:1 RING SPACER<br />
<strong>10</strong>:1 WASHER<br />
LARGE DIAPHRAM<br />
SPRING RETAINERS<br />
SPRING<br />
FCU COVER<br />
8:1 RING SPACER<br />
8:1 WASHER<br />
SPRING RETAINERS<br />
FCU AS<br />
SUPPLIED<br />
92-96<br />
FCU (IF EQUIPPED<br />
WITH OPTIONAL<br />
RING AND SPACER)<br />
Fig. 12-b<br />
P/N: 4809646<br />
©2006 <strong>Paxton</strong> Automotive<br />
All Rights Reserved, Intl. Copr. Secured<br />
17FEB06 v2.0 92-96<strong>Viper</strong>(4809646v2.0)<br />
12-2
Change language